Bedienungsanleitung Logitech Z 5450 (Seite 7 von 26) (Englisch, Französisch)

474693

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

English

Headphones

When the headphones are plugged in, the speakers will mute and all sound will go to the headphones. The

LCD will display ‘Headphones’ as the active effect. Only a stereo signal will go the headphones, regardless of

the input or surround sound effect. When listening to material with surround sound content, the audio will be

“downmixed” so that all the sounds are heard in the headphones. When the headphones are unplugged, the

speakers will automatically return to their previous state.

Wall-Mounting

There is 1 slot on the underside of the Satellite Speaker that can be used for wall mounting.

When wall mounting the unit, ensure that it is within reach of the power outlet.

You will need 1 screw (4.4 mm) to wall mount the unit. To do this:

1. Ensure that the wall you use is smooth, ﬂ at, dry and sturdy.

2. Fix the screws into the wall, leaving their heads 3 mm (0.12 in.) clear of the wall surface.

3. Remove any connections to the unit and locate it over the screw heads. When in line, gently push the

unit on to the wall and move it downwards to secure.

Muting the Speakers

To mute the speakers, simply press the mute button. The speakers will be muted and the control pod LCD will

display ‘Mute On’. The speakers will remain muted until any of the following occur:

• ‘Standby’ button is pressed. Speakers go into standby mode.

• ‘Mute’ button is pressed again. The speaker volume returns to previous volume level and speakers go to

Ready state.

• ‘Level’, ‘input’, ‘effect’, or ‘settings’ button is pressed. The speaker volume returns to the previous level

and the product performs the appropriate action for the button that was pressed.

• Control knob is rotated (disengages mute and adjusts Main volume).

• ‘TEST’ button is pressed on the remote (puts system in Test Mode).

Changing Surround Sound Settings

To change the surround sound settings, press the ‘settings’ button. Not all settings are available for each

effect (see table below). If the active effect does not have changeable settings, then the LCD will show

‘No settings for this effect’.

Cables

• Satellites:

– L / R cord length: 15’ (4.5m)

– C cord length: 15’ (4.5m)

• Cables:

– 8’ 3-pair cable with (3) 3.5mm male stereo connectors on each end – color-coded to match the

jacks on the control pod

• Subwoofer:

– Control pod connection: Female D-SuB jack

– Powered connections to front/center satellites: spring clips

• Subwoofer connection: 8’ D-SuB cable

EFFECTS

SETTING

DTS® DIGITAL 5.1 DOLBY® DIGITAL 5.1 PRO LOGIC II MOVIE PRO LOGIC II MUSIC

Panorama

•

Dimension

•

Center Width

•

Surround Delay

•• • •

Night Mode

•

Table 2 - Available Settings for Each Effect

Operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Logitech Z 5450 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info