522471
22
Zoom out
Zoom in
Vorherige Seite
1/152
Nächste Seite
24 User Manual
2.3 CHANGING KEYPAD BACKLIGHT AND CONTRAST
Press and immediately release the right side of 'POWER' (do not press and hold
the key, or the "power-off" message will be displayed!): the backlight increases. Repeat this
operation the backlight decreases.
Press and immediately release the left side of 'POWER': the contrast increases.
Press and immediately release the left side of 'POWER' the contrast decreases. In other
words, first pressure of the key will increase the value till you keep it pressed, next pressure
of the key will decrease the value till you keep it pressed.
Warning!!!
At low temperatures the CCFL backlight may not glow properly. Allow a few minutes to warm up.
2.4 SELECTING THE USER INTERFACE LANGUAGE
It is possible to set the language to display menus, data pages, warning/alarm
messages, full/quick info, list of objects found by find/nearest function, and on charts
(such as place's names, buoy's names and so on). The default setting is Italian.
To select the language you want:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "LANGUAGE" + 'ENTER'
Choose the language you prefer and press 'ENTER' to confirm.
Note
If the selected language is not available on cartographic data, English language is used instead.
WARNING !!!
If you have accidentally selected an incomprehensible language, and you don't be able to reselect your language (the
above procedure is not of help to you), follow this procedure: press 'MENU', move the cursor to highlight the third
selection (starting from the top) which corresponds to the Basic Settings menu and press 'ENTER'. Then a window
appears with "Language" message, press 'ENTER'; now select your language and press 'ENTER' again.
Anyway if you in trouble, see Chapter "System Test" for a RAM Clear operation: the chart plotter will also return
all selections, in particular language, to original default values.
2.5 EXTERNAL CONNECTIONS
2.5.1 GPS CONNECTION F
OR
S
KY
X7 & S
KY
X7
FISH
Connect the GPS : see the picture in Fig. 2.5.1 e Fig. 2.5.1a.
Control the input setting following the procedure:
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lorenz COMPACT X7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info