522471
133
Zoom out
Zoom in
Vorherige Seite
1/152
Nächste Seite
135
User Manual
The chart plotter screen becomes very dark after a long exposure to direct sunlight
— Control the contrast (see Par. 2.3).
7.5.2 IF YOU NEED ASSISTANCE
The list above (see Par. 6.5.1) should allow you to solve most of the operating
problems you are likely to encounter. Simply disconnecting the chart plotter from power
for a moment may solve your problem as well.
If this does not help, you can try one additional memory clear option. This is a factory
default RAM Clear that should only be tried after all other attempts have been made. When
using the RAM Clear feature, you will loose all user stored information and the chart plotter will
default to factory settings. Before this step, you have the option of saving user Marks, Track
history and Routes to a User C-CARD (this is an optional purchase from your dealer). To
perform a RAM Clear see Par. 7.6.1.
If you still need assistance, call your local dealer, reporting the Software Release
and Cartography information available in the About page.
'MENU' + "About..." + 'ENTER'
7.5.2.1 World Background Charts
The internal background charts can be updated to include the MAX A and B level
charts which provide improved marine data, rivers, lakes, terrestrial data (major streets ,
highways , railways, etc...), Nav-Aids, depth areas, territorial water areas, etc... by reading
them from a special data C-CARDs (contact your local dealer). All units must have the
WorldWide Background upload function that is activated from the system.
Worldwide Background Update
The System Update menu is entered from the About page. To select this menu follow the
procedure:
Plug the special data C-CARD + 'MENU' + "About..." + 'ENTER' + 'MENU' + "UPDATE
WORLDWIDE CHARTS" + 'ENTER'
7.6 SYSTEM TEST
If you have connected your position-finding device according to the instructions,
and chosen the proper menu selection for your device, and are still having problems with
your chart plotter, the extended auto-test should help determine the problem. Make sure
the chart plotter is turned Off. While pressing and holding any other key, turn the chart
plotter On. A new menu will appear on the display:
133

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lorenz COMPACT X7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info