Bedienungsanleitung Lorenz MAGNUM PRO (Seite 92 von 124) (Englisch)

757004

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

94 User Manual

Depth Window

Turns On/Off the display of Depth Window on the screen. The default setting is Off.

'MENU' + "BASIC SETTINGS" + 'ENTER' + "DEPTH WINDOW" + 'ENTER'



DGPS = Differential GPS

Provides even greater positioning accuracy than standard GPS.

Dynamic Nav Aids

This function allows settings blinking lights on Nav-Aids. The blink period and color of each Nav-aid

is read from the Nav-Aid attributes available on the data cartridge. When the ship is inside the Nav-Aid

nominal range, the light of the Nav-Aid will start blinking.

'MENU' + "MAP SETTINGS" +'ENTER' + "Dynamic Nav Aids" + 'ENTER'

Diffusers

Turns Off (the object is not visible independently of the selected “Underwater Object Depth Value)/

Icon (the object icon is visible without tags, in the range selected from “Underwater Object Depth

Value” option)/Icon+Depth (the object icon and tag is visible, in the range selected from “Underwater

Object Depth Value” option) the displaying of Obstructions. The default setting is Icon.

'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Diffusers" +

'ENTER'

Display Mode

To simplify the customization of the chart display, the map settings are now re-organized in modes

allowing the user to choose the preferred setting. Pre-programmed settings are user selectable from

Full, Medium, Low, Radar, Tides, Custom. The default setting is Custom.

'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Display Mode"

+ 'ENTER'

Distance (Track)

When the tracking function is On and the type of track storing is Distance, you can store a fix when the

distance from its last stored position is greater than a defined distance. Choose in the range 0.01, 0.05, 0.1,

0.5, 1.0, 2.0, 5.0, 10.0 Nm (the distance unit is selected by the user). The default setting is 0.01 Nm.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "DISTANCE" + 'ENTER'

Distance (Unit)

Sets the distance unit among Nm = nautical miles, Sm = status miles e Km = kilometers. The default

setting is Nm.

'MENU' + "BASIC SETTINGS" + 'ENTER' + "DISTANCE" + 'ENTER'



DTG = Distance To Go

The actual distance to reach the Target.

DSC

DSC (Digital Selective Calling) is a method of establishing a VHF radio call; it is used to announce

urgent maritime safety information broadcasts. This system allows mariners to instantly send Distress

Call or/and Position Request to the other vessels equipped with a DSC transceiver within range of the

transmission.

'MENU' + "DSC" + 'ENTER'

EBL = Electronic Bearing Line

Dotted line with direction selectable by the user (see Par. 4.3).

Select Advanced Mode + 'ENTER' + "EBL & VRM" + 'ENTER'

Echosounder AVAILABLE ONLY IF THE CHARTPLOTTER IS CONNECTED TO THE

VOICE NAVIGATION SYSTEM

Enables (On) or disables (Off) the Echosounder C-Voice mode. If it is On, the Depth message is spo-

ken. The message is spoken if a valid depth data is received by the chart plotter or if it is in Simulation

mode. The default setting is Off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorenz MAGNUM PRO Seite 92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info