Bedienungsanleitung Lorenz MAGNUM PRO (Seite 101 von 124) (Englisch)

757004

101

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

103

User Manual

default setting is Classic. Normal is recommended when the chart plotter is not exposed to the direct

sunlight. When this mode is set the maps are displayed in order to use colors as similar as possible to the

ones used in the original paper charts. Classic uses more vivid colors. Night Vision is recommended

when the environment is dark in order to reduce the glare of the display. The chart plotter displays

maps and screen in darker colors. Sunlight is designed to enhance the visibility of the screen when the

chart plotter is exposed to the sunlight. The maps are much brighter than in the other modes and the

depth areas are filled with white color so different depth areas are not easily distinguishable. NOAA

allows setting NOAA paper chart colors presentation.

'MENU' + "MAP SETTINGS" +'ENTER' + "Palette" + 'ENTER'

Perspective View

Chart data may be projected in perspective mode during navigation. This function allows setting the

panoramic View of the chart. As the upper side of the map is more compressed than the lower side, a

wider map area is visible. The perspective view allows showing more chart information immediately

ahead and around the cursor.

'MENU' + "MAP SETTINGS" +'ENTER' + "Perspective View" + 'ENTER'

Pictures and Diagrams

The MAX data format allows assigning one or more image to any cartographic object. These Pictures

are typically used to facilitate the identification of cartographic objects or places around the map: they

can be the landscape layout nearby a harbor, the shape of a bridge or of a buoy etc.

On some objects, such as bridges, the image associated can represent the Diagram representing the

shape of the objects and the various characteristics (length, height, type of bridge etc.).

Fig.5f - Pictures and Diagrams

Place Names

Turns On/Off the displaying of the Names. The default setting is On.

'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Place Names" +

'ENTER'

POIs

Searches for Nearest POIs:

'MENU' + "FIND" + 'ENTER' + "POIs" + 'ENTER'

POIs

Enables or disables the displaying of POIs (Points Of Information). The default setting is On.

'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "POIs" + 'ENTER

Port 1/2/3/4/5 Input

Disables (selecting Off) or sets the format for the navigation data input serial Port1/2/3/4/5. For

example to set the Port as NMEA-0183 (4800 Baud Rate, Parity None, 8 Bits Number, 1 Stop Bit and

Normal Polarity) you must select 4800-N81-N. The available choice is among (1200-N81-N), NMEA

(4800-N81-N), NMEA (4800-N82-N), NMEA (9600-O81-N), NMEA (9600-N81-N), C-COM. The

default setting is (4800-N81-N).

'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' + "PORT 1/2/3/4/5

INPUT" + 'ENTER'

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorenz MAGNUM PRO Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info