Bedienungsanleitung Lorenz STARLIGHT PLUS (Seite 75 von 110) (Englisch)

757007

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

User Manual

Speed (Unit)

Sets the speed unit among Kts = knots, Mph = miles per hour e Kmh = kilometers per hour. The

default setting is Kts.

'MENU' + "BASIC SETTINGS" + 'ENTER' + "SPEED" + 'ENTER'

Static Navigation

Sets up a threshold for the speed. When the speed received from the positioning device is under that

threshold, the chartplotter displays zero. The default value is 0.5 Kts.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "STATIC NAVIGATION" +

'ENTER'

Step Unit (Track)

Choose Distance (Dist) - the chartplotter can store a fix when the distance from its last stored position

is greater than a defined distance; Time - the chartplotter can store a fix after a defined time; Auto - the

software decides when storing a position, on the basis of the straight or curved track. The default

setting is Time.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "STEP UNIT" + 'ENTER'

nSTR = Steering

The difference between COG and CTS. If COG is 25° and CTS is 30°, then STR is 5° Right.

Target

In order to tag on the chart the point, towards which the ship is Heading, you can use a special mark,

called Target. When the Target is placed, all navigation data are referred to this Target (see Par. 3.4,

4.1.1.4, 4.2.1.3, 4.2.2.3).

Inserting Target : place cursor + 'DEST'

Deleting Target (Basic Mode) : place cursor on Target + 'CLEAR'

Deleting Target (Advanced Mode) : place cursor on Target + 'ENTER' + 'DELETE' + 'ENTER'

TD = Time Difference

Loran-C positions are determined by precise timing of the intervals between reception of pulses trans-

mitted by pairs of stations in the selected chain. Between any two stations a ship must be located

somewhere along a line of possible positions where the measured Time Difference, TD, between ar-

rival of pulses from those stations would be observed. The TD is measured from the time of reception

of the master station signal to the time of reception of the slave station signal.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "COORDINATE

SYSTEM" + 'ENTER' + "TD" + 'ENTER'

nTide

The periodic rise and fall of the surface of oceans, bays, etc., due principally to the gravitational interac-

tions between the Moon and Earth.

nTide Info

The Tide Info feature is the combination of a new tide heights database that will be included within

new C-CARDs and new features which calculate the tide graph for all primary and secondary ports

world-wide. This function can calculate the tide heights for any past or future date and as a by-product

of this calculation will also display the Maximum and Minimum Tide height and time for the day

selected plus the times of Sunrise and Sunset. At some chart levels, the chartplotter will display a new

Tide Diamond Symbol for every Port or tide point in the database covered by that particular C-CARD

(see Par. 3.5.4).

Tide Stations

Finds the nearest Tide Stations (up to 10) on the map, from the boat position - if a valid fix is received

- or from the cursor position - if the fix position is not good.

'MENU' +"FIND" + 'ENTER' + "TIDE STATIONS" + 'ENTER'

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorenz STARLIGHT PLUS Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info