757006
86
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
88 User Manual
Ship Icon Mode
Sets the ship icon as Steady or Blinking. The default setting is Steady.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' + "SHIP ICON MODE" +
'ENTER'
Simulation
Used in order to use your chartplotter without input data. It generates a display with a moving vessel,
so that you can practice using the controls in safety.
Simulation (menu)
Enables (On)/disables (Off) Activate Simulation; it is possible to insert desired values for Speed, Head-
ing, Date and Time and selects the Cursor Control function.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER'
SNR = Signal to Noise Ratio
The ratio of the magnitude of a signal that of the noise (interference).
SOG = Speed Over Ground
A calculation of the rate of movement of the ship over the ground.
Speed
The current velocity at which you are travelling, relative to a ground location.
Speed Filter
Turns On/Off the Speed Filter. When it is On, you can filter the speed of the ship, to optimize it. The
default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX " + 'ENTER' + "SPEED FILTER" + 'ENTER'
Speed (Simulation)
Sets the value for speed in the Simulation mode. The default setting is 01.0 Kts.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER' + "SPEED" + 'ENTER'
Speed (Unit)
Sets the speed unit among Kts = knots, Mph = miles per hour e Kmh = kilometers per hour. The
default setting is Kts.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "SPEED" + 'ENTER'
Static Navigation
Sets up a threshold for the speed. When the speed received from the positioning device is under that
threshold, the chartplotter displays zero. The default value is 0.0 Kts.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "STATIC NAVIGATION" +
'ENTER'
Step Unit (Track)
Choose Distance (Dist) - the chartplotter can store a fix when the distance from its last stored position
is greater than a defined distance; Time - the chartplotter can store a fix after a defined time; Auto - the
software decides when storing a position, on the basis of the straight or curved track. The default
setting is Time.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "STEP UNIT" + 'ENTER'
STR = Steering
The difference between COG and CTS. If COG is 25° and CTS is 30°, then STR is 5° Right.
Target
In order to tag on the chart the point, towards which the ship is Heading, you can use a special mark,
called Target. When the Target is placed, all navigation data are referred to this Target (see Par. 3.4,
4.1.1.4, 4.2.1.3, 4.2.2.3).
Inserting Target : place cursor + 'DEST'
Deleting Target (Basic Mode) : place cursor on Target + 'CLEAR'
86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lorenz STARLIGHT PRO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info