Bedienungsanleitung Lorus 7N42 (Seite 1 von 2) (Englisch)

593727

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

NREAQ

7-2010

■ HOW TO USE NON-CALENDAR MODEL

Pull the crown OUT to the FIRST click and set the

time. Then push the crown IN.

Note: When you set the time, first set the minute

hand to a properly advanced time, then

return the minute hand to the correct time

by turning it COUNTERCLOCKWISE.

Time setting for Cal. V516

Turn the hands counterclockwise to advance

them 4 to 5 minutes ahead of the desired time.

Then turn them clockwise to set them to the

exact time.

■ HOW TO USE DAY/DATE MODEL

The day of the week can be displayed

bilingually (English/another language) and you

can select either.

1. How to set the day and date

Pull out the

crown to the first

click position.

(The crown of

this watch can

be pulled out to

the second click

position.)

Turn the crown

and set the

previous day

and date. (The

day and date

can be selected

alternatively

and displayed in

English or the

other

language.)

Pull out the

crown to the

second click

position and

set the present

day and date

by turning the

minute hand.

Day setting for Cal. V828 (Ladies’ Day/Date)

Turn the hands clockwise and counterclockwise

repeatedly between 11:15 pm and 3:45 am to

select the desired day and language.

Note: Do not attempt to set the day and date

between the times of

9:00 pm and 4:00 am

as this may cause the day and date

displays to change out of sequence.

2. How to set the time

■ LUMIBRITE WATCH

✼ If your watch is a LORUS LUMIBRITE watch, it

has following features.

LORUS LUMIBRITE watches absorb and store light

energy from natural and artificial light sources

and emit light in the dark. They are made of

environmentally friendly material, and therefore,

are harmless to human beings and the

environment.

• With a full charge, LORUS LUMIBRITE watches

glow in the dark hours longer than conven-

tional luminous watches of this type. If ex-

posed to a light of more than 500 lux (i.e.,

the brightness of a typical office) for approxi-

mately 10 minutes, or direct sunlight for 2

minutes, they will glow for hours.

• Since LORUS LUMIBRITE watches emit the light

they store, the brightness will decrease

gradually over time. The length of time they

will glow may also differ slightly depending

on such factors as the brightness of and

distance from the light source used to charge

the watch.

Pull out the

crown to the

second click

position and the

second hand

stops. The

second hand

should be

stopped on 12

o’clock position.

Turn the crown

and set the

desired time.

Push the crown

in to the normal

position in

accordance

with a time

signal.

• Be sure to check that the AM/PM is correctly

set. (The day and date are designed to

change once every 24 hours.)

• To adjust the correct time for a quartz watch,

it is necessary to advance the minute hand

4 or 5 minutes ahead of the correct time and

then turn it counterclockwise to set the

designated time.

Normal position

First click

NAEAQ 10.6.17, 4:34 PMPage 1 Adobe

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus 7N42 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info