Bedienungsanleitung Lorus 7T62 (Seite 1 von 2) (Englisch)

593729

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

NRE7T62C

10-2006

CAL. 7T62, YM62 (RF3 SERIES)

■ SETTING THE DATE

• Before setting the date, be sure to set the

main time.

• It is necessary to adjust the date at the end

of February and 30-day months.

Date

1. Pull out the crown to the first click.

2. Turn the crown clockwise until the desired

date appears.

3. Push the crown back in to the normal

position.

Notes:

1. Do not set the date between 9:00 p.m. and

1:00 a.m. Otherwise, the date may not

change properly.

2. Do not press button “B” when the crown is

at the first click position, as this will move

the alarm hands.

● After all the adjustments are completed,

push the crown back in to the normal

position in accordance with a time signal,

checking that the main time and alarm

hands indicate the same time.

* For the adjustment method, see the steps

above.

1. Press button “A” for 2 seconds.

* The stopwatch minute hand turns a full circle.

2. Press button “B” repeatedly to set the

stopwatch minute hand to the “0” position.

* The hand moves quickly if button “B” is kept

pressed.

3. Press button “A” for 2 seconds.

* The stopwatch 1/5-second hand turns a full

circle.

4. Press button “B” repeatedly to set the

stopwatch 1/5-second hand to the “0”

position.

* The hand moves quickly if button “B” is kept

pressed.

• The alarm and stopwatch hands can be re-

adjusted in the following order by pressing

button “A” for 2 seconds.

Stopwatch

1/5-second

hand

Alarm

hands

Stopwatch

minute hand

• If the stopwatch hands are not in the “0”

position, follow the procedure below to set

them to the “0” position.

3) Stopwatch hand position adjustment

Stopwatch

minute hand

Stopwatch

1/5-second hand

• Set the alarm hands to the time the main

time hands indicate.

2) Alarm hand adjustment

● Press button “B” repeatedly to set the alarm

hands to the time indicated by the main

time hands.

* The hands move quickly if button “B” is kept

pressed.

Minute hand

Hour hand

Alarm minute hand

Alarm hour hand

■ SETTING THE TIME AND ADJUSTING

THE STOPWATCH HAND POSITION

• This watch is so designed that

1) main time setting,

2) alarm hand adjustment and

3) stopwatch hand position adjustment

are all made with the crown at the second

click position. Once the crown is pulled out

to the second click, be sure to make all the

above adjustments at the same time.

Minute hand

Hour hand

1. Pull out the crown to the second click when

the small second hand is at the 12 o’clock

position.

* If the stopwatch is measuring or stopped, it is

automatically reset to “0”.

* If the alarm has been set, the alarm hands will

turn to indicate the current time.

2. Turn the crown to set the hour and minute

hands.

* It is recommended that the hands be set to

the time a few minutes ahead of the current

time, taking into consideration the time

required to set the alarm hands and to adjust

the stopwatch hand position if necessary.

Notes:

1. When setting the hour hand, be sure to

check that AM/PM is correctly set. The

watch is so designed that the date

changes once in 24 hours.

2. When setting the minute hand, first

advance it 4 to 5 minutes ahead of the

desired time and then turn it back to the

exact minute.

Small second hand

1) Main time setting

a.Normal position : Free

b.First click :• Date setting

• Alarm time setting

c.Second click :• Main time setting

• Adjusting the alarm hands

to the current time

• Adjusting the stopwatch

hand position

Crown

Hour hand

Minute hand

Crown

■ DISPLAY AND CROWN / BUTTONS

Alarm minute hand

Alarm hour hand

Date

a b c

Stopwatch

1/5-second hand

Stopwatch minute hand

Small

Second hand

■ CHARACTERISTICS

1. Time: Indicated by the hour, minute and

small second hands.

2. Date: Displayed in numerals.

3. Stopwatch: Measures up to 60 minutes in

1/5 second increments.

• Split time measurement

4. Single-time alarm: Can be set to ring only

once at a designated time within the

coming 12 hours.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus 7T62 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lorus 7T62

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info