Bedienungsanleitung Lorus V071 (Seite 1 von 2) (Englisch)

593765

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

■ CHARACTERISTICS

1. Analogue time display: Hour, minute and

second hands.

2. Digital time display: Hour, minute and

seconds.

3. Calendar display: Month, date and day

of the week.

• Automatic calendar: Calendar adjusts

automatically for odd and even months

except February of leap years.

4. Time indication: Changeover between 12-

and 24-hour indications is possible.

5. Alarm: The alarm rings at the designated

time for 20 seconds.

6. Hourly time signal: Can be set to ring every

hour on the hour with a single “beep”.

7. Stopwatch: Measures up to 59 minutes and

59 seconds 99 in 1/100 second increments.

• Split time measurement

8. Illuminating light: The light illuminates the

display for easy viewing in the dark.

4. Press button “A” to set the flashing digits.

One digit is advanced with each press of

button “A”. The flashing digits except the

seconds and 12-/24-hour indication move

quickly by keeping button “A” pressed.

5. After all the adjustments are completed,

press button “B” to return to the TIME mode.

• Seconds setting

Press button “A” in accordance with a time

signal. The seconds are reset to “00” and

start immediately.

When the seconds count any number from

“30” to “59” and button “A” is pressed, one

minute is added and the seconds are

immediately reset to “00”.

Notes:

1. When setting the hour digits, check that

AM/PM is properly set. Only “PM” mark is

displayed. For the AM setting, there is no

indication.

2. When the time function is displayed in the

24-hour indication, the alarm will also be

displayed in the 24-hour indication.

3. If the watch is left untouched in the TIME

SETTING display with the digits flashing, it

will automatically return to the TIME mode

in 1 to 2 minutes.

■ HOW TO SET THE ANALOGUE TIME

• Before setting the analogue time, be sure

to set the digital time.

(Refer to “HOW TO SET THE DIGITAL TIME”.)

1. Pull out the crown when the second hand

is at the 12 o’clock position. The second

hand will stop on the spot.

2. Turn the crown to set the hour and minute

hands to the desired time.

* When setting the minute hand, advance

it 4 to 5 minutes ahead of the time and

then turn it back to the exact minute.

3. Push the crown back in to the normal

position when the second digits count “00”

in the digital time display.

1. Press button “B” to show the ALARM mode.

2. Press button “C” to show the ALARM

SETTING display. The hour digits start

flashing.

3. Selection of the digits to be adjusted

(flashing) is made in the following order by

pressing button “C”.

Minutes

Hour ALARM mode

4. Press button “A” to set the flashing digits.

One digit is advanced with each press of

button “A”. The flashing digits move quickly

by keeping button “A” pressed.

5. After all the adjustments are completed,

press button “B” to return to the ALARM

mode.

1. Press button “B” to show the TIME mode.

2. Press button “C” for 2 to 3 seconds to show

the TIME SETTING display. The second digits

start flashing.

3. Selection of the digits to be adjusted

(flashing) is made in the following order by

pressing button “C”.

NREV071C

8-2011

CAL. V071 (RVR SERIES)

CAL. V072 (RBK SERIES)

Hour hand

Normal

position

Extended

position

Crown

Second hand

ALARM CHRONOGRAPH

Minute hand

CALENDAR mode

ALARM mode

STOPWATCH mode

TIME mode

The selection of the mode is made in the

following order with each press of button “B”.

4. Press button “A” to set the flashing digits.

One digit is advanced with each press of

button “A”. They move quickly by keeping

button “A” pressed.

5. After all the adjustments are completed,

press button “B” to return to the CALENDAR

mode.

* If the watch is left untouched in the

CALENDAR SETTING display with the digits

flashing, it will automatically return to the

CALENDAR mode in 1 to 2 minutes.

Press for 2 to 3

seconds.

( )

Date

Month

Day

CALENDAR mode

■ HOW TO SET THE CALENDAR

Day of the week

Month

Date

1. Press button “B” to show the CALENDAR

mode.

2. Press button “C” for 2 to 3 seconds to show

the CALENDAR SETTING display. The date

digits start flashing.

3. Selection of the digits to be adjusted

(flashing) is made in the following order by

pressing button “C”.

■ HOW TO SET THE DIGITAL TIME

Hour

Minutes

Seconds

“PM” mark is displayed in the

12-hour indication.

“AM” mark is not displayed.

Seconds

( )

■ HOW TO SET THE ALARM

Hour

Minutes

Alarm mark

“PM” mark is displayed in the

12-hour indication.

“AM” mark is not displayed.

Hourly time

signal mark

ALARM CHRONOGRAPH

Hour hand

Minute hand

Normal

position

Crown

Second

hand

Hour

Minutes

Seconds

“PM” mark is displayed in the

12-hour indication.

“AM” mark is not displayed.

Extended

position

■ DISPLAY AND CROWN / BUTTONS

Minutes

Hour

12- or 24-hour

indication

TIME mode

Press for 2 to 3

seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus V071 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lorus V071

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info