Bedienungsanleitung Lorus W650 (Seite 3 von 4) (Englisch)

593866

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

3. Depress button “B” for 2 to 3 seconds to show

the adjustable timer setting display. The hour

digits start flashing.

4. Selection of the digits to be adjusted (flashing)

is made in the following order by depressing

button “C”.

Minutes Hour

→

5. Depress button “D” to set the digits. One digit

is advanced with each depression of the button.

The digits move quickly by keeping the button

depressed.

6. After all the adjustments are completed, de-

press button “B” to return to the timer display.

The time you have set remains displayed.

Note: If the watch is left untouched in the adjustable

timer setting display with the digits flashing,

it will automatically return to the timer

display in 2 to 3 minutes.

Adjustable timer operation

Refer to “Preset timer operation” above.

■ HOW TO SET THE ALARM

• The alarm can be set to ring on a 24-hour basis.

At the designated time, the display is illumi-

nated as the alarm rings.

Alarm display mark

1. Depress mode

selector “A” to show

the alarm display.

1. Turn mode selector

“A” to set “ALARM”

at the 12 o’clock

position.

➧

2. Depress button “B” for 2 to 3 seconds to show

the alarm setting display. The alarm mark and

“on”/“- -” mark disappear and the hour digits

(and “A”/“P” mark if the time is set in the 12-

hour indication) start flashing.

3. Depress button “C” to select the digits to be

adjusted (flashing).

Hour Minutes

→

4. Depress button “D” to set the digits. One digit

is advanced with each depression of the button.

The digits move quickly by keeping the button

depressed.

5. After all the adjustments are completed, depress

button “B” to return to the alarm display.

The alarm mark and “on” mark are automati-

cally displayed.

Notes:

1. When the time function is displayed in the 24-

hour indication, the alarm is also displayed in

the 24-hour indication.

2. When setting the hour digits in the 12-hour

indication, check that “A”(AM)/“P”(PM) mark

is properly set. In the 24-hour indication, there

is no indication.

3. If the watch is left untouched in the alarm

setting display with the digits flashing, it will

automatically return to the alarm display in 2

to 3 minutes.

Engagement/disengagement of the alarm

• With each depression of button “C” in the alarm

display, the alarm is engaged and disengaged

alternately.

Alarm disengaged

Alarm engaged

Turning on/off of the hourly time signal

and button operation confirmation sound;

and alarm test

• With each depression of button “C” in the time/

calendar display, the hourly time signal and

confirmation sound for the button operation are

turned on and off alternately.

Hourly time signal and confirma-

tion sound turned on

Hourly time signal and confirma-

tion sound turned off

• At the designated time, the alarm rings and the

display is illuminated alternately for 20 seconds

and stop. To stop them manually, depress/turn

mode selector “A”, or depress button “B”, “C”,

“D” or LITE button.

• The alarm can be tested by keeping buttons “C”

and “D” depressed in the time/calendar display.

*After the alarm sound is tested, be sure to

check turning on/off of the hourly time signal

and confirmation sound, as they are turned on

and off alternately by depressing button “C”.

■ NOTE ON UNUSUAL DISPLAY

While in the time/calendar setting display, the

display as shown below will appear if both buttons

“C” and “D” are depressed at the same time. This

is not a malfunction. Depress/turn mode selector

“A”, or depress button “B”, “C”, “D” or LITE button

to return to the time/calendar display, and then

set the time/calendar again.

[All the segments lighting up]

■ LUMIBRITE WATCH

(dial, hands, buttons, case, bezel, strap, etc.)

✩ If your watch is a LORUS LUMIBRITE watch, it

has following features.

LORUS LUMIBRITE watches absorb and store light

energy from natural and artificial light sources

and emit light in the dark. They are made of

environmentally friendly material, and therefore,

are harmless to human beings and the environment.

• With a full charge, LORUS LUMIBRITE watches

glow in the dark hours longer than conven-

tional luminous watches of this type. If ex-

posed to a light of more than 500 lux (i.e., the

brightness of a typical office) for approximate-

ly 10 minutes, or direct sunlight for 2 minutes,

they will glow for hours.

• Since LORUS LUMIBRITE watches emit the light

they store, the brightness will decrease gradually

over time. The length of time they will glow

may also differ slightly depending on such factors

as the brightness of and distance from the light

source used to charge the watch.

■ LORUS LITE

While LITE button is kept depressed in the time/

calendar, stopwatch, timer or alarm display, the

electroluminescent light evenly illuminates the

display for easy viewing in the dark.

Notes:

1. LORUS LITE watches work with one battery.

When the electroluminescent light begins to

lose its luminance, this is an indication that

the battery is depleted. We recommend that

you change the battery before the watch itself

stops.

2. If the electroluminescent light is used conti-

nuously for a long time, the battery life may

be less than the specified period.

■ BATTERY CHANGE

The miniature lithium battery SEIKO CR2025, SONY

CR2025 or Matsushita CR2025, which powers your

watch should last approximately 2 years. However,

because it is inserted at the factory, the actual life

of the battery once in your possession may be less

than 2 years.

Be sure to replace the battery to prevent any possible

malfunction as soon as it runs down. To replace

the battery, we recommend taking the watch to a

local watch repair shop.

↑

“on”/“- -”

(Alarm

engagement/

disengage-

ment mark)

“A”(AM)/

“P”(PM)

mark

Alarm

mark

Current time

Hourly time

signal mark

TIME

CHRONO

TIMER

ALARM

TIME

LITE button

Minutes

Hour

• Battery Life Indicator

When the battery nears its end, all the digits of

the display start flashing. In that case, replace

the battery as soon as possible.

Notes:

1. If the stopwatch is used for more than 10 hours

a day, the timer for more than 10 hours a day,

the alarm more than once a day, the illuminating

light more than 3 times a day, the auto illumination

more than 30 times a week and/or the confirmation

sound more than 24 times a day, the battery

life may be less than the specified period.

Lorus W650 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info