Bedienungsanleitung Lorus W820 (Seite 1 von 4) (Englisch)

593868

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

INSTRUCTION MANUAL

CAL. W820 (RWP SERIES)

NREW820

03-2002

1. The compass function

a) The compass function may not work depending

on the condition of use such as season,

weather or obstacles intercepting view

of the sun or moon.

b) For such activities as mountain climbing

and orienteering which require very accurate

directions, be sure to use a conventional

magnetic compass together with this watch

for safety’s sake.

2. The signal function

a) Do not use the watch as a distress signal

transmitter as it is not designed for such

purpose. The signal light emitted from

the watch may not be perceived depend-

ing on such factors as distance to the

target and angle of the watch face.

CAUTION

■ CHARACTERISTICS

1. Time/calendar display:

• Hour, minutes, seconds, month, date and

day of the week.

• Fully automatic calendar: Calendar adjusts

automatically for odd and even months including

February of leap years from the year 1994 up

to the end of 2043.

• Time indication: Changeover between 12-

and 24-hour indications is possible.

• Daylight saving time: Daylight saving

time can be set.

2. Compass: Indicates 16 directions on the basis

of the directions of the sun and moon.

• Moon phase display with the age of the

moon.

3. Stopwatch: Measures up to 10 hours with

1 ⁄100 second readout.

• Split time measurement

4. Daily alarm: The alarm can be set to ring on

a 24-hour basis.

• Hourly time signal: Can be set to ring

every hour on the hour with a single beep.

5. Signal function: Four preset Morse code

messages can be sent by illuminating light.

6. Illuminating light: The light evenly illumi-

nates the display in the dark.

■ BUTTONS AND DISPLAYS

Alarm mark

Date

Month

Day

“A”(AM)/

“P”(PM)

mark

Hour

Minutes

Seconds

Graphic display

Hourly time

signal mark

“DST”

(Daylight

Saving

Time)

mark

The selection of the displays can be made in the

following order with each depression of button

“A”.

Display

indicators

Rotating compass bezel

Compass

display

Alarm display

Stopwatch

display

Signal display

Time/calendar

display

* The confirmation sound beeps differently when

the time/calendar display appears, so that you

can easily know the display shown.

* Even if the stopwatch display is changed over

to another while the measurement is in progress,

the stopwatch continues counting properly and

the flashing stopwatch display indicator appears

in the display.

■ HOW TO SET THE TIME/CALENDAR

AND DAYLIGHT SAVING TIME

Month

Day

Date

Seconds

Minutes

Graphic display

Hourly time

signal mark

Display

indicators

“A”(AM)/

“P”(PM)

mark

Hour

“DST” mark

1. Depress button “A” to show the time/calendar

display.

2. Depress button “B” for 2 to 3 seconds to show

the time/calendar setting display. The “DST”

mark starts flashing and the flashing “ON” or

“OFF” mark is displayed in place of the day.

3. Selection of the digits to be adjusted (flashing)

is made in the following order by depressing

button “C”.

4. Depress button “D” to set the flashing digits.

One digit is advanced with each depression of

button “D”. Digits except seconds move quick-

ly by keeping button “D” depressed.

5. After all the adjustments are completed, de-

press button “B” to return to the time/calen-

dar display.

Daylight

saving time

HourMinutesSeconds

→→→

12- or 24-hour

indication

DateMonthYear

←←←

↑

↓

Seconds Setting

Depress button “D” in accordance with a time

signal. The seconds are reset to “00” and start

immediately.

When the seconds count any number from “30” to

“59” and button “D” is depressed, one minute is

added and the seconds are reset to “00”.

How to Set the Daylight Saving Time

With each depression of button “D”, “ON” and

“OFF” marks appear alternately. After showing

“ON” mark, depress button “C” to select the hour

digits, and then depress button “D” to set them

one hour ahead of the regular time. “DST” mark

remains displayed to indicate that the daylight

saving time is shown.

Notes:

1. When setting the hour digits in the 12-hour

indication, check that “A” (AM)/“P” (PM) mark

is properly set. In the 24-hour indication, there

is no indication.

2. Once the year, month and date have been set,

the day of the week is set automatically.

3. If the watch is left untouched in the time/

calendar setting display with the digits flash-

ing, it will automatically return to the time/

calendar display in 2 to 3 minutes.

■ HOW TO USE THE COMPASS

CAUTION

1. The compass function may not work depending

on the condition of use such as season,

weather or obstacles intercepting view of

the sun or moon.

2. For such activities as mountain climbing

and orienteering which require very accu-

rate directions, be sure to use a conven-

tional magnetic compass together with this

watch for safety’s sake.

By setting the hemisphere and longitude of your

place, the directions of the sun and moon, the age

of the moon and moon phase can be displayed on

the basis of the current time. When set according

to the directions of the sun and moon, the rotating

compass bezel indicates 16 directions.

Compass Data Setting

• Before setting the hemisphere and longitude of

your place, check that the current time of your

place is set correctly in the time/calendar display.

(Please note that if the “ON” mark for the daylight

saving time is set, the directions of the sun and

moon are calculated inclusive of the one hour

advanced from the regular time. If the “ON”

mark is shown, therefore, check that the hour

digits are advanced one hour.)

1. Depress button “A” to show the compass dis-

play.

2. Depress button “B” for 2 to 3 seconds to show

the compass data setting display. The hemisphere

mark starts flashing with the “LONG.” (longitude)

mark displayed.

3. Selection of the hemisphere, longitude and the

digits to be adjusted (flashing) is made in the

following order by depressing button “C”.

Northern or Southern

Hemisphere

East or west

longitude

←

→

↑

↓

Longitude setting

(units digit)

Longitude setting

(tens digit)

4. Depress button “D” to set the hemisphere, longitude

of your place and the flashing digits. The

digits move quickly if the button is kept depressed.

* To set the longitude of your place, refer to

“TABLE OF LONGITUDES OF CITIES

THROUGHOUT THE WORLD” below.

5. After all the adjustments are completed, de-

press button “B” to return to the compass dis-

play.

* Flashing dots appear in the display immedi-

ately after the button is depressed, to indi-

cate that the watch is calculating the direc-

tion and the age of the moon.

* If the watch is left untouched in the compass

data setting display with the digits flashing,

it will automatically return to the compass

display in 2 to 3 minutes.

MOON

AGE

Direction of

sun/moon

Sun compass

indicator

Age of the

moon

Compass

display

indicator

Rotating compass

bezel

Moon phase display

Hemisphere mark

“DST” mark

Direction mark

Current time

Moon compass

indicator

Moon age

mark

Lorus W820 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info