Bedienungsanleitung Lorus W820 (Seite 3 von 4) (Englisch)

593868

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Notes:

1. When the time function is displayed in the 24-

hour indication, the alarm is also displayed in

the 24-hour indication.

2. When setting the hour digits in the 12-hour

indication, check that “A” (AM)/“P” (PM) mark

is properly set.

3. If the watch is untouched in the alarm setting

display with the digits flashing, it will auto-

matically return to the alarm display in 2 to 3

minutes.

Engagement/Disengagement of

the Alarm

• With each depression of button “C” in the alarm

display, the alarm is engaged and disengaged alternately.

• The alarm rings at the designated time for 20

seconds and stop. To stop it manually, depress

button “A”, “B”, “C” or “D”.

Alarm engaged

Alarm disengaged

5. After all the adjustments are completed, de-

press button “B” to return to the alarm display.

The alarm mark and “ON” mark are automati-

cally displayed.

Turning on/off of the Hourly Time Signal

and Confirmation Sound; and Alarm Test

• With each depression of button “C” in the time/

calendar display, the hourly time signal and

confirmation sound for the button operation are

turned on and off alternately.

Hourly time signal and confirmation

sound turned off

Hourly time signal and confirmation

sound turned on

• The alarm can be tested by keeping buttons “C”

and “D” depressed in the time/calendar display.

* After the alarm sound is tested, be sure to check

turning on/off of the hourly time signal and

confirmation sound, as they are turned on and

off alternately by depressing button “C”.

■ HOW TO USE THE SIGNAL FUNCTION

CAUTION

Do not use the watch as a distress signal trans-

mitter as it is not designed for such purpose.

The signal light emitted from the watch may

not be perceived depending on such factors as

distance to the target and angle of the watch

face.

With a press of a button, 4 preset Morse code

messages can be given by light automatically. Messages

can also be given manually by turning on and off

the illuminating light.

1. Depress button “A” to show the distress signal

display.

2. Selection of the four preset messages and the

manual mode is made in the following order by

depressing button “C”.

“LL”

(ALL WELL)

→→

)

→

(

“ ” (Manual mode)

“I”

REQUIRE

DOCTOR

“Y”

(YES)

“N”

(NO)

3. Depress button “D” to give a desired Morse

code message by light.

* The preset messages are given repeatedly

while the button is kept depressed.

* Once button “D” is depressed, the preset

message will be given to the end even if the

button is released before it is completed.

* When the manual mode is selected, the illuminating

light is turned on when button “D” is depressed,

and is turned off when it is released.

←

→

Message marks

Signal display

indicator

Current

time

Manual mode

mark

)(

Message

indicator

Duration

illumi-

nation

- – – - - – - - - – - -

WLEL

REQUIRE

DOCTOR

ALL WELL

YES

Everything is

going well.

YES

(Affirmative)

(Negative)

– - –––

– - – – - - - -

– - - – – – – - – -

– – – – - – -

Meaning

3.2 seconds

3.0 seconds

9.0 seconds

4.0 seconds

The display remains illumi-

nated while the button is kept

depressed.

—

——

MANUAL

*Pattern of light illumination:

– Long duration of illumination

- Short duration of illumination

Pattern of light

illumination

(Morse code)

Seriously in-

jured. Send

a doctor.

Mes-

sage

code

Pattern of Light Illumination

(Morse Code)

■ NOTE ON UNUSUAL DISPLAY

While in the time/calendar setting display, the

display as shown below will appear if both buttons

“C” and “D” are depressed at the same time. This

is not a malfunction. Depress button “A”, “B”, “C”

or “D” to return to the time/calendar display, and

then set the time/calendar again.

[All the segments lighting up]

■ LUMIBRITE WATCH

(dial, hands, buttons, case, bezel, straps, etc.)

✩ If your watch is a LORUS LUMIBRITE watch, it

has following features.

LORUS LUMIBRITE watches absorb and store light

energy from natural and artificial light sources

and emit light in the dark. They are made of

environmentally friendly material, and therefore,

are harmless to human beings and the environment.

• With a full charge, LORUS LUMIBRITE watches

glow in the dark hours longer than conventional

luminous watches of this type. If exposed to a

light of more than 500 lux (i.e., the brightness

of a typical office) for approximately 10 minutes,

or direct sunlight for 2 minutes, for example,

they will glow for 3 to 5 hours.

• Since LORUS LUMIBRITE watches emit the light

they store, the brightness will decrease gradually

over time. The length of time they will glow

may also differ slightly depending on such factors

as the brightness of and distance from the light

source used to charge the watch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus W820 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info