Bedienungsanleitung Lorus W942 (Seite 1 von 4) (Englisch)

593869

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

NR1W942

2-95 198L1

Instruction & Warranty Booklet

DIGITAL STOPWATCH

R23 Series (Cal. W942)

■ HOW TO USE THE STOPWATCH

• The stopwatch can measure up to 9 hours, 59

minutes, 59 seconds and 99 in 1⁄100 seconds.

* Even if the stopwatch display is changed to another

while the measurement is in progress, it continues

counting properly. After the stopwatch is used,

however, be sure to reset it as the battery energy

is consumed enormously to shorten the battery

life.

Stopwatch display mark

■ CHARACTERISTICS

1. Stopwatch: Measures up to 9 hours, 59 minutes,

59 seconds and 99 with 1⁄100 second readout.

• Lap time measurement: Up to 9 lap times

can be measured. The lap time difference and

the fastest lap time are calculated and displayed

during the measurement.

2. Time/calendar display: Hour, minutes, seconds,

month, date and day of the week.

• Automatic calendar adjustment: Calendar

adjusts automatically for odd and even months

including February of leap years, but not for

February of common years.

• Time indication: Changeover between 12-

and 24-hour indications is possible.

3. Daily alarm: The alarm can be set to ring on a

24-hour basis.

4. Dual time: Time of a different time zone can be

set and displayed.

5. Stroke function: The watch can be set to beep

at a selected rate to serve as a pacemaker in

jogging, etc.

6. Countdown timer: Up to 9 hours 59 minutes

and 59 seconds can be set in seconds.

Lap time measurement

• “Lap time” refers to an elapsed time required to

cover a given section of the whole distance.

1. At the start of the activity, depress button “D” to

start the stopwatch.

2. At the end of the first lap, depress button “A”.

The first lap time and lap number are displayed,

though the second lap time is being measured

internally.

3. Depress button “A” to release the lap time before

the end of the second lap. The first lap time and

lap number disappear, and the measurement in

progress and “0” are displayed in place of the lap

time and lap number, respectively.

4. At the end of the second lap, depress button “A”.

The second lap time and lap number are dis-

played, though the third lap time is being mea-

sured internally.

5. Measurement and release of the lap time can be

repeated by depressing button “A”.

6. At the end of the activity, follow either of the two

methods below.

a. To display the final lap time, depress button

“A”. Then, depress button “A” to release the

lap time, and depress button “D” to stop the

measurement.

* The time displayed when button “D” is de-

pressed is not the total elapsed time of the

activity, that is, the time that elapsed from

the start until the end of the activity but the

time that elapsed from the start until the

stop of the measurement.

b. To display the total elapsed time of the activi-

ty, depress button “D” to stop the measure-

ment.

7. Depress button “B” to reset the stopwatch.

Stopwatch operation

Depress button “C” to show the stopwatch display.

Start Stop

Restart

Stop

Reset

Accumulate repeatedly by

depressing button “D”.

Accumulated elapsed time measurement

DD D

Notes:

1. When a lap time measured is the fastest among

the lap times previously measured, a short beep

rings to signal that the memory has been updated

with the new fastest lap time.

2. The lap number counts up to “9”. After “9”, the

number returns to “1”.

• While a lap time is being displayed, depress but-

ton “B”. With each depression of the button, the

difference between the displayed lap time and the

previous lap time is displayed in the following

order.

Latest lap time Lap time difference

→

Fastest lap time

←

INSTRUCTIONS

for

Cal. W942

■ BUTTONS AND DISPLAYS

The selection of the display can be made in the

following order with each depression of button “C”.

Stopwatch

display

* A flashing display mark indicates that the corre-

sponding function is in use.

Timer

display

Time/calendar

display

Alarm

display

Dual time

display

Stroke

display

Lap time difference and the fastest lap time

To return to the measurement in progress, depress

button “A”.

↑

Seconds

Alarm mark

Minutes

Hour

PM mark

Hour

ST.W

Minutes

Seconds

1/100 second

Month (Day) Date

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus W942 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info