Bedienungsanleitung Lorus W942 (Seite 2 von 4) (Englisch)

593869

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

• The lap time difference is displayed without a plus

or minus sign. Instead, the lap number of the

faster lap time is always displayed at the right of

the “–” mark.

Ex.)

The display should be read as “Lap 2 is 5 seconds

87 faster than Lap 3”.

Notes: 1. While the measurement in progress is shown

on the display, the lap time difference

and the fastest lap time cannot be shown

by depressing button“B”.

2. While the latest lap time, lap time differ-

ence or the fastest lap time is shown on

the display, the display cannot be changed

to another by depressing button “C”.

■

HOW TO SET THE TIME/CALENDAR

Seconds

Minutes

(units digit)

→→ →

←

DateDay ←←Month

Seconds setting

When the seconds digits are flashing, depress button

“A” in accordance with a time signal. The seconds

are reset to “00” and start immediately.

4. Depress button “A” to set the flashing digits.

One digit is advanced with each depression of

button “A”. Digits except seconds move quickly

by keeping button “A” depressed.

5. After all the adjustments are completed, depress

button “C” to return to the time/calendar display.

* With each depression of button “A”, month and day

are displayed alternately.

* With each depression of button “D”, the display

changes over between the 12- and 24-hour indica-

tions.

1. Depress button “C” to show the time/calendar

display.

2. Depress button “B” to show the time/calendar

setting display. The second digits start flashing.

3. Selection of the digits to be adjusted (flashing)

is made in the following order by depressing

button “D”.

Note: When setting the hour digits in the 12-hour

indication, check that AM/PM is properly

set. Only “PM” is displayed and there is no

indication for the AM setting. In the 24-

hour indication, there is no indication.

Minutes

(tens digit)

■ HOW TO SET THE ALARM

1. Depress button “C” to show the alarm display.

2. Depress button “B” to show the alarm setting

display. The hour digits start flashing.

3. Depress button “D” to select the digits to be

adjusted (flashing).

Minutes

(units digit)

→

Minutes

(tens digit)

→

Hour

↑

4. Depress button “A” to set the digits. One digit is

advanced with each depression of the button.

The digits move quickly by keeping the button

depressed.

5. After all the adjustments are completed, depress

button “C” to return to the alarm display.

Notes:

1. When the time function is displayed in the 24-

hour indication, the alarm is also displayed in

the 24-hour indication.

2. When setting the hour digits in the 12-hour indication,

check that AM/PM is properly set.

Only “PM” is displayed and there is no indication

for the AM setting. In the 24-hour indication,

there is no indication.

Alarm disengaged

Alarm engaged

• The alarm rings at the designated time for 18

seconds and stops. To stop it manually, depress

button “A”, “B”, “C” or “D”.

• With each depression of button “D” in the alarm

display, the alarm is engaged and disengaged alternately.

Engagement/disengagement of the alarm

■ HOW TO SET THE DUAL TIME

Time of a different time zone can be set and displayed

together with the time you have set in “HOW TO SET

THE TIME/CALENDAR”.

1. Depress button “C” to show the dual time display.

2. For dual time setting, refer to “HOW TO SET

THE TIME/CALENDAR”.

60 → 80 → 120 → 160

■ HOW TO USE THE STROKE FUNCTION

• 4 different stroke rates (60, 80, 120 and 160 strokes

per minute) have been preset for the stroke function,

and the watch beeps at a selected preset stroke

rate. Therefore, it can serve as a pacemaker in

such activities as jogging.

Selection of the preset stroke rate

1. Depress button “C” to show the stroke display.

2. Depress button “B” to select the desired stroke

rate. Selection of the stroke rate is made in the

following order by depressing button “B”.

Operation of the stroke function

• Depress button “D” in the stroke display. The

watch starts beeping at the selected rate.

* To turn off the stroke sound, depress button

“D”. With each depression of button “D”, the

stroke sound is turned on and off alternately.

↑

Hour

↑

Month (Day) Date

Seconds

MinutesHour

PM mark

Current time

Alarm mark

Alarm display mark

Hour

Minutes

PM mark

ALARM

DUAL

PM mark

Hour

Minutes Seconds

Dual time display mark

PACER

Number of strokes

per minute

Stroke display mark

ST.W

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus W942 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info