Bedienungsanleitung Lorus Y182 (Seite 1 von 4) (Englisch)

593876

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

INSTRUCTION MANUAL

CAL. Y182 (RSZ SERIES)

NREY182

08-96

■ CHARACTERISTICS

1. Time: Indicated by the hour, minute and

small second hands.

2. Date: Displayed in numerals.

3. Alarm: Set on a 12-hour basis with two

small hands displaying the designated alarm

time.

4. Stopwatch: Measures up to 30 minutes

in 1/5 second increments.

•Split time measurement

5. Battery life indicator: The small second

hand moves at two-second intervals when

the battery needs to be replaced.

■ DISPLAY AND CROWN OPERATION

Minute hand

Stopwatch

minute hand

Alarm minute handAlarm hour hand

Crown 1

a. Normal position: Free

b. First click : Setting the date by turning

Crown 1 clockwise

c. Second click : •Setting the time

•Adjusting the stopwatch

hand position

Crown 2

a. Normal position: Free

b. First click : Alarm engagement

c. Second click : Setting the alarm hands

to the current time

■ HOW TO SET THE DATE

Hour hand

Small

second

hand

a b c

Crown 1

a b c

Crown 2

Stopwatch

1/5-second hand

Date

Minute handHour hand

Crown 1

Date

Second click

First click

1. Pull out Crown 1 to the first click.

2. Turn Crown 1 clockwise until the previous

day’s date appears.

3. Pull out Crown 1 to the second click, and

advance the hour and minute hands until

the desired date appears.

4. Push Crown 1 back into the normal position.

Note:

Do not set the date between 9:00 p.m. and

1:00 a.m. Otherwise, the date may not change

properly.

* If it is necessary to set the date during that time

period, first change the time to any time outside

it, set the date and then reset the correct time.

■ HOW TO SET THE TIME

Small

second

hand

Minute handHour hand

First click

Crown 1

Second

click

1. Pull out Crown 1 to the second click when

the small second hand is at the 12 o’clock

position. The small second hand stops on

the spot.

2. Turn Crown 1 to set the hour and minute

hands to the desired time.

3. Push Crown 1 back in to the normal position

in accordance with a time signal.

Notes:

1. When setting the hour hand, be sure to

check that AM/PM is correctly set. The

watch is so designed that the date changes

once in 24 hours.

2. When setting the minute hand, first advance

it 4 to 5 minutes ahead of the desired

time and then turn it back to the exact

minute.

■ HOW TO USE THE ALARM

• The alarm time is set on a 12-hour basis.

• The alarm hands move independently of

the center hands.

Adjustment of alarm hands

Before setting the alarm, first set the alarm

hands to the current time indicated by the

center hands.

Minute handHour hand

Alarm

minute hand

1. Pull out Crown 2 to the second click.

A beep sounds for one second.

2. Turn Crown 2 to set the alarm hands to

the time indicated by the center hour and

minute hands.

3. Push Crown 2 back in to the normal position.

Note:

When setting the alarm minute hand, first

advance it 4 to 5 minutes ahead of the current

time and then turn it back to the exact minute.

Crown 2

Second click

Alarm

hour hand

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus Y182 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lorus Y182

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info