Bedienungsanleitung Lorus Y735 (Seite 2 von 4) (Englisch)

593853

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

1 Press button “A” to show the stopwatch

display. (The stopwatch indicator starts

flashing.)

The stopwatch can measure up to 24 hours

and is displayed in minutes, seconds, and

1/100 seconds up to 40 minutes, and in

hours, minutes, and seconds after the first

40 minutes. (The 1/100 second indicator

flashes during the first 40 minutes.)

When the measurement is over 24 hours,

the stopwatch will be reset to “0:00oo”

and start counting again.

2 Reset the digits to “0:00oo” before using

the stopwatch. When the split and the

stopwatch indicators are flashing, press

button “B” to check that the stop indicator

starts flashing, and then press button “C”

twice to reset the digits to zero.

3 When measuring a long period of time,

return the stopwatch to the time/calendar

display after the stopwatch starts to pre-

vent any possible mistaken operation.

* When button “B” or “C” is pressed in the

stopwatch display, a single “beep” sounds

to confirm the operation.

Start

Stop Restart ResetStop

BB BC

Start

CBC

Split

release

Stop Reset

Finish (First runner)

Finish (Second runner)

Start

Finish time

of 2nd

competitor

Reset

Stop

Finish

time of 1st

competitor

Accumulated elapsed time measurement

Split time measurement

**Restart and stop can be repeated by pressing

button “B”.

**Measurement and release of split time can be

repeated by pressing button “C”.

Measurement between two competitors

1 Press button “A” for 2 seconds to activate

the alarm setting function. (The alarm set

indicator starts flashing.)

2 Press button “B” to activate the “Hour” or

“Minute” setting. The display changes in

the following order with each press of but-

ton “B”.

3 One digit (flashing) is advanced with each

press of button “C”. The digits are ad-

vanced quickly by keeping button “C” pressed.

4 After all the adjustments are completed,

press button “A” to return to the time/

calendar display.

(The display returns directly to the time/

calendar display and not to the time/cal-

endar setting.)

▲

▼

Hour Minutes

Alarm set indicator

■ HOW TO SET THE ALARM

“A” (AM)

Hour setting

Minute setting

Note: When setting the hour digits, be sure

to check that the “A” (AM)/“P” (PM)

mark is correctly set.

■

HOW TO ENGAGE AND DISENGAGE

THE ALARM AND THE TIME SIGNAL

Alarm display

1 Press button “C” in the time/calendar dis-

play to show the alarm display. The alarm

display is shown while button “C” is kept

pressed.

Minutes

Hour

2 With each press of button “B” while keep-

ing button “C” pressed, the engagement

and disengagement of the alarm and the

time signal are made as follows:

“A” (AM)

▼

▲

Alarm is engaged.

Time signal is disengaged.

Time signal is engaged.

Alarm is disengaged.

Alarm and time

signal are engaged.

Alarm and time signal

are disengaged.

The alarm rings at the designated time for 30

seconds and stops. However, the alarm can

be stopped manually by pressing button “C”

in any display.

■ HOW TO STOP THE ALARM

■ ALARM TEST

The alarm can be tested with a beeping sound

by pressing buttons “B” and “C” at the same

time in the time/calendar display.

■

HOW TO SET THE TIME/CALENDAR

Time/calendar setting

indicator

1 Press button “A” to activate the time/calendar

setting function. (The time/calendar setting

indicator and the second digits start flashing.)

2 Selection of the digits to be adjusted (flash-

ing) is made in the following order by

pressing button “B”.

3 One digit (flashing) is advanced with each

press of button “C”. (The digits except

seconds are advanced quickly by keeping

button “C” pressed.)

• Second setting

Press button “C” in accordance with a

time signal. The seconds are reset to

“00” and start immediately.

When the seconds count any number

from “30” to “59” and button “C” is pressed,

one minute is added and the seconds

are immediately reset to “00”.

4 After all the adjustments are completed,

press button “A” to return to the time/

calendar display.

Seconds Minutes MonthHour

Day

Date

→→→

←←

↑

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus Y735 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lorus Y735

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info