Bedienungsanleitung Lorus Y737 (Seite 3 von 4) (Englisch)

593886

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Set

alarm time

Alarm

mark

Hourly time

signal mark

Current time

1. Press button “A” to show the ALARM mode.

“ALARM” is displayed first, and then the

ALARM mode appears.

2. Press button “A” for 2 to 3 seconds to

show the alarm setting display. The hour

digits (and “AM”/“PM” mark if the time is

set in the 12-hour indication) start flashing.

3. Press button “C” to select the digits to be

adjusted (flashing).

Minutes

→

Hour

↑

4. Press button “D” to set the flashing digits.

One digit is advanced with each press of

the button. Digits move quickly by keeping

button “D” pressed.

After all the adjustments are completed, press

button “A” to return to the ALARM mode.

■ ALARM MODE

• The alarm can be set to ring on a 24-hour

basis.

Notes:

1. When the time function is displayed in the

24-hour indication, the alarm is also displayed

in the 24-hour indication.

2. When setting the hour digits in the 12-

hour indication, check that AM/PM is properly

set. In the 24-hour indication, there is no

indication.

3. If the watch is left untouched in the alarm

setting display with the digits flashing, it

will automatically return to the ALARM

mode in 2 to 3 minutes.

Engagement/disengagement of the alarm

& turning on/off of the hourly time signal

•

With each press of button “C” in the ALARM

mode, the alarm and hourly time signal are

engaged and disengaged in the following order.

Alarm engaged

Hourly time signal engaged

Both engaged

Neither engaged

• At the designated time, the alarm rings for

20 seconds and stop. To stop it manually,

press any of the buttons.

• The alarm can be tested by keeping button

“C” pressed in the ALARM mode.

Checking the set alarm time

• Press and hold button “D” in the TIME/

CALENDAR mode. While the button is

kept pressed, the alarm time that has been

set is displayed.

Note:

When the alarm is disengaged, the set alarm

time will not be displayed.

■ DUAL TIME MODE

• The time of a different time zone can be

displayed.

Main time

Dual time

1. Press button “A” to show the DUAL TIME

mode. “dUAL” is displayed first, and then

the DUAL TIME mode appears.

2. Press button “A” for 2 to 3 seconds to

show the dual time setting display. The

hour digits (and “AM”/“PM” mark if the

time is set in the 12-hour indication) start

flashing.

3. Press button “C” to select the digits to be

adjusted (flashing).

Minutes

→

Hour

↑

4. Press button “D” to set the flashing digits.

One digit is advanced with each press of

the button. Digits move quickly by keeping

button “D” pressed.

5. After all the adjustments are completed,

press button “A” to return to the DUAL

TIME mode.

Notes:

1. When the time function is displayed in the

24-hour indication, the dual time is also

displayed in the 24-hour indication.

2. When setting the hour digits in the 12-

hour indication, check that AM/PM is properly

set. In the 24-hour indication, there is no

indication.

3. If the watch is left untouched in the dual

time setting display with the digits flashing,

it will automatically return to the DUAL

TIME mode in 2 to 3 minutes.

■ NOTE ON UNUSUAL DISPLAY

While in the time/calendar setting display

with the digits flashing, the display as shown

below will appear if both buttons “C” and “D”

are pressed successively in a short time. This

is not a malfunction. Press button “A”, “C” or

“D” to return to the TIME/CALENDAR mode,

and then set the time/calendar again.

■ LUMIBRITE WATCH

(dial, hands, buttons, case, bezel, strap, etc.)

✩ If your watch is a LORUS LUMIBRITE watch,

it has following features.

LORUS LUMIBRITE watches absorb and store

light energy from natural and artificial light

sources and emit light in the dark. They are

made of environmentally friendly material,

and therefore, are harmless to human beings

and the environment.

• With a full charge, LORUS LUMIBRITE

watches glow in the dark hours longer than

conventional luminous watches of this type.

If exposed to a light of more than 500 lux

(i.e., the brightness of a typical office) for

approximately 10 minutes, or direct sunlight

for 2 minutes, they will glow for hours.

• Since LORUS LUMIBRITE watches emit

the light they store, the brightness will

decrease gradually over time. The length

of time they will glow may also differ slightly

depending on such factors as the brightness

of and distance from the light source used

to charge the watch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus Y737 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info