Bedienungsanleitung Lorus YK36 (Seite 2 von 2) (Englisch)

593899

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

■ ELECTRO LUMINESCENT BACKLIGHT

Press either Button D or E in any mode to turn

the back light on. The electroluminescent back

light illuminates the display for easy viewing in

the darkness.

ST/STP

RESET

MODE

LIGHT

■ HOW TO SET THE ALARM

1. Press Button C two times to enter the Alarm

Setting mode.

The hour digits start flashing.

2. Press Button A to set the hour digits.

3. Press Button B to confirm the hour setting and

move on to the minute setting. The minute

digits start flashing.

4. Press Button A to set the minute digits.

5. Press Button C to confirm the alarm settings

and return to the Time display.

ST/STP

RESET

MODE

LIGHT

Alarm

indicator

Arm or disarm the alarm

• To arm the alarm, press Button A and B

simultaneously.

• The alarm is armed or disarmed alternately.

• While the alarm is armed, the alarm indicator

appears on the display.

* For Cal. YK36, different indicators

appear on display.

* There is no Button E for Cal. YK36.

How to stop the alarm while sounding

To stop the alarm manually while sounding, press

either Button A or B.

■ LUMIBRITE WATCH

✼ If your watch is a LORUS LUMIBRITE watch, it

has following features.

LORUS LUMIBRITE watches absorb and store light

energy from natural and artificial light sources

and emit light in the dark. They are made of

environmentally friendly material, and therefore,

are harmless to human beings and the

environment.

• With a full charge, LORUS LUMIBRITE watches

glow in the dark hours longer than conven-

tional luminous watches of this type. If ex-

posed to a light of more than 500 lux (i.e.,

the brightness of a typical office) for approxi-

mately 10 minutes, or direct sunlight for 2

minutes, they will glow for hours.

• Since LORUS LUMIBRITE watches emit the light

they store, the brightness will decrease

gradually over time. The length of time they

will glow may also differ slightly depending

on such factors as the brightness of and

distance from the light source used to charge

the watch.

■ BATTERY CHANGE

The miniature lithium battery CR2032 for Cal.

YK35 and CR1620 for Cal. YK36, which powers

your watch, should last approximately 2 years.

However, because it is inserted at the factory,

the actual life of the battery once in your

possession may be less than 2 years. Be sure to

replace the battery to prevent any possible

malfunction as soon as it runs down. To replace

the battery, we recommend taking the watch

to a local watch repair shop.

■ CARE OF YOUR LORUS WATCH

This watch contains precise electronic

components. Never attempt to open the case

or remove the back cover.

• BATTERY

CAUTION

Do not expose the old battery to fire

or recharge it. Keep it at a place

beyond the reach of children. If a

child swallows it, consult a doctor

immediately.

• WATER RESISTANT

* If your watch is 200 M/20 BAR, 100 M/10 BAR

or 50 M/5 BAR water resistant, it is so

indicated on the dial/case back.

• Do not operate the buttons when the

watch is wet.

• If the watch is exposed to salt water, rinse

it in fresh water and then wipe it thoroughly

dry.

• Should you find any water or condensation

inside the watch, immediately have it

checked. Water can corrode electric parts

inside the case.

NO NO NO

YES

YES NO NO

YES YES NO

Condition

of use

Accidental

contact

with water,

such as

splashes

and rain

Swimming

and taking

a shower

Skin

diving

Scuba

diving

Indication

on the dial/

case back

Indication

YES

WATER

RESISTANT

WATER

RESISTANT

(50M/5 BAR

)

WATER

RESISTANT

100M/10 BAR

or above

(

Caution:

Leather straps are not water resistant except so

indicated, even if the watch head is water

resistant.

• ALLERGIC REACTION

Because the case and band touch the skin

directly, it is important to clean them regularly.

If not, shirt sleeves may be stained and those

with delicate skin may develop a rash. Please

wear the watch with some play to avoid any

possible allergic reaction. If you develop a rash

on your wrist, stop wearing and consult a

physician.

• MAGNETISM/STATIC ELECTRICITY

Your watch will not be affected by magnetism

generated by household electric appliances

but keep your watch away from a place where

the watch is subject to strong electric field and

static electricity.

• SHOCKS AND VIBRATIONS

Your watch may be worn for normal sports

activities, However, be careful not to drop it or

hit it on hard surfaces and avoid any severe

impacts.

• TEMPERATURE

Your watch works with stable accuracy within a

temperature range between 0˚C and 50 ˚C. Do

not expose the watch to a place exceeding this

temperature range.

• CLEANING

Use only a soft cloth and clean water for

cleaning your watch. Never use chemicals,

especially soap.

■ SERVICE

When your LORUS watch requires repair or

sevicing, please see the enclosed WARRANTY/

GUARANTEE.

Printed in China

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus YK36 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info