Bedienungsanleitung Lorus YK60 (Seite 5 von 6) (Englisch)

593901

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

■ HOW TO RESET THE WATCH

1. Press buttons A, B, C, and D simultaneously

in any display mode for 1 second to reset the

watch. All indicators appear on the watch

display and all digits are reset to “8”.

■ ILLUMINATING LIGHT

To turn the backlight on, press button A in any

3. Press button D to take the next split time.

4. Press button C to stop the stopwatch.

5. Press button D to reset.

* The split time can be measured repeatedly by

pressing button D.

6. Press button B to go back to the Time/

Calendar display.

Manual reception

If the watch fails to receive radio signals,

conduct manual reception.

1. Press button D in the Time/Calendar display

for more than 2 seconds. The watch starts

receiving the radio signal.

2. After the watch succeeds in receiving a

radio signal, or if it fails to receive a signal in

about 5 minutes, it will return to the Time/

Calendar display.

* To return to the Time/Calendar display manually,

press any of the buttons.

Checking the reception result

Look at the antenna mark in the Time/Calendar

display to check the reception result.

■ AUTOMATIC TIME SETTING

The watch can maintain precise time by

automatically receiving a radio signal which

broadcasts the official time standard once a

day. A radio signal can be selected between

MSF and DCF77.

* MSF is the radio signal for broadcasting the

official time standard for the United Kingdom,

and DCF77 is for Germany. The watch can

receive MSF when it is placed within

approximately 800 km from the MSF transmitter,

and can similarly receive DCF77 when it is

placed within approximately 1,000 km from the

DCF77 transmitter, depending on conditions.

Automatic reception

The watch receives the selected radio signal

automatically to set the time. The signal can

be selected between MSF and DCF77 in the

Time/Calendar setting mode (Refer to “■ HOW

TO SET THE TIME/CALENDAR”). Once the watch

starts receiving the radio signal, it will take about

5 minutes until the reception attempt is

completed. When the watch successfully

receives the signal, or if it fails to receive the

signal in about 5 minutes, the watch will return

to the Time/Calendar display.

* Turn the antenna of the watch (at the 12 o’clock

position) toward the direction of the transmitter

of the selected signal to facilitate signal

reception.

* Leave the watch where it can receive radio

signals during the automatic reception period

(starting from 3:00 AM, or starting again from 4:00

AM if the reception from 3:00 AM is not

successful).

* The watch receives radio signals in the same

way as a TV or radio. Keep the watch where it

can easily receive signals, for instance, close to

a window. Keep the watch away from objects

that cause radio static.

* Please note that the watch may be unable to

receive radio signals properly under the

following conditions.

a) Inside a building, between tall buildings,

underground

b) Close to overhead power lines, TV stations,

train cables

c) Close to home electrical appliances or OA

devices such as TV’s, refrigerators, air

conditioners, air cleaners, PC’s, fax machines

d) In places generating radio interference, such

as construction sites, airports, military bases

or in heavy traffic

e) Inside a vehicle, train, or airplane

f) Close to furniture made of steel, such as a

steel desk

Checking the receiving condition during

reception

Look at the antenna mark to check receiving

conditions during radio signal reception. If the

mark is turning with parabolas, a radio signal is

being successfully received. If parabolas

appear, but soon disappear, receiving

conditions are not sufficient for successful

reception. If no parabola appears, receiving

conditions are poor, or the watch is outside the

reception range, and the watch is unable to

receive the radio signal.

Reception successful (The watch was able to

receive a signal within the last 24 hours.)

Reception within last 24 hours failed (The watch

has failed to receive a signal within the last 24

hours, but succeeded in receiving a signal

during the last 5 straight days.)

Reception failed (The watch has failed to

receive a signal for 5 straight days.)

When the buttons are released, the watch

starts receiving a radio signal.

*In such a case, the watch will starts receiving

MSF and S1 is shown on the display.

2. After the watch succeeds in receiving a

radio signal, or if it fails to receive a signal in

about 5 minutes, it will return to the Time/

Calendar display.

* To return to the Time/Calendar display manually,

press any of the buttons.

Split

release

Split

Stop

Reset

Start

DC D DC

Split indicator

Split time

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lorus YK60 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info