Bedienungsanleitung Lorus Z002 (Seite 1 von 2) (Englisch)

593894

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

NREY922C

10-2010

CAL. Y922, YK30 , YK31, YK32 , YK33, YK34

CAL. Z001, Z002 , Z003 (R23 SERIES )

■ DISPLAY AND BUTTON OPERATION

■ CHARACTERISTICS

1. Time/calendar display: Hour, minute,

second, date, day of the week and month.

2. Automatic calendar adjustment: Calendar

adjusts automatically for odd and even

months except February of leap years.

3. Time indication: Changeover between 12-

hour and 24-hour indications is possible.

4. Stopwatch: 24-hour stopwatch with 1/100

second readout up to 40 minutes and with 1

second readout after the first 40 minutes.

Split time measurement is available.

5. Alarm: The alarm rings at the designated

hour and minute with “beep, beep” for 30

seconds.

6. Hourly time signal: Can be set to ring every

hour on the hour with a single “beep”.

7. Illuminating light (for Cal. YK30, YK31,

YK32, YK33, YK34 & Z001): The light evenly

illuminates the display in the dark.

Button B:

• Calendar (month, date and day) display in

the time/calendar display.

• Start/stop in the stopwatch function.

• Selection of the digits to be adjusted in the

alarm setting function and the time/

calendar setting function.

Button C:

• Alarm display in the time/calendar display.

• Split/Split release/Reset in the stopwatch

function.

• Setting the digits in the alarm setting function

and the time/calendar setting function.

• Stopping the alarm in any display.

Button B while keeping Button C pressed:

Engagement and disengagement of the alarm

and the hourly time signal.

Button C while keeping Button B pressed:

Changeover of the calendar (month and date)

display.

Buttons B & C:

Alarm test in the time/calendar display.

■ HOW TO SET THE DUAL CALENDAR

DISPLAY

1 Press Button B to show the calendar (month,

date, and day) display. The calendar display

is shown while Button B is kept pressed.

2 The month and the date change places with

each other with each press of Button C while

keeping Button B pressed.

* In the 12-hour indication, “A” (AM)/“P” (PM)

mark is displayed. In the 24-hour indication,

there is no indication.

■ HOW TO USE THE STOPWATCH

1 Press Button A to show the stopwatch display.

(The stopwatch indicator starts flashing.)

The stopwatch can measure up to 24 hours

and is displayed in minutes,

seconds, and

1/100 seconds up to 40 minutes, and in

hours,

minutes, and seconds after the first

40 minutes. (The 1/100 second indicator

flashes during the first 40 minutes.)

When the measurement is over 24 hours, the

stopwatch will be reset to “0:00oo” and start

counting again.

2 Reset the digits to “0:00oo” before using the

stopwatch. When the split and the

stopwatch indicators are flashing, press

Button B to check that the stop indicator

starts flashing, and then press Button C twice

to reset the digits to zero.

3 When measuring a long period of time, return

the stopwatch to the time/calendar display

after the stopwatch starts to prevent any

possible mistaken operation.

* When Button B or C is pressed in the

stopwatch display, a single “beep” sounds

to confirm the operation.

Start Stop Restart

Stop

Reset

■ HOW TO SET THE ALARM

Hour setting

Minute setting

1 Press Button A for 2 seconds to activate the

alarm setting function. (The alarm set

indicator starts flashing.)

2 Press Button B to activate the “Hour” or

“Minute” setting. The display changes in the

following order with each press of Button B.

3 One digit (flashing) is advanced with each

press of Button C. The digits are advanced

quickly by keeping Button C pressed.

4 After all the adjustments are completed,

press Button A to return to the time/calendar

display.

(The display returns directly to the time/

calendar display and not to the time/

calendar setting.)

Start

Finish time

of 1st

competitor

Stop

Finish time

of 2nd

competitor

Reset

Measurement between two competitors

Finish (First runner)

Finish (Second runner)

Note: When setting the hour digits, be sure to

check that the “A” (AM)/“P” (PM) mark is

correctly set.

[Cal. YK32 / Z001]

Hour

Minute

EL button

Hourly time

signal mark

Alarm mark

Day indicator

Second

EL button

[Cal. YK33]

[Cal. YK30 / YK31]

Hour

EL button

Hourly time

signal mark

AM/PM indicator

12-hour/24-hour indication

EL button

Alarm mark

Day indicator

Second

Minute

Alarm/

Hourly time signal mark

Hour

Second

Minute

Day indicator

[Cal. YK34]

Hour

Second

Minute

EL button

Minute

Hour

[Cal. Y922 / Z002 / Z003]

Hourly time

signal mark

Day indicator

Alarm mark

Second

Button A:

• Selection of the display.

The selection is made in the following order:

Day

indicator

Alarm/Hourly time

signal mark

AM/PM indicator

Time/calendar display Stopwatch display

Press

Button A

for 2 sec.

Alarm settingTime/calendar setting

Month

Day

Date

Day

Month

Date

Stopwatch

indicator

Stop indicator

Split indicator

1/100 second

indicator

B:Start/Stop

C: Split/

Split release/

Reset

Minute

Second

1/100 second

Alarm set indicator

Hour

Minute

“A” (AM)

Start

❈ Measurement and release of split time can be

repeated by pressing button C.

Split time measurement

B B CC C

Split

Release

Stop Reset

❈

❈ Restart and stop of stopwatch can be repeated

by pressing button B.

Accumulated elapsed time measurement

B B B

❈

BLUE 10.8.18, 5:19 PMPage 1 Adobe

Lorus Z002 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lorus Z002

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info