593920

Lorus Z022 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
1. From the normal time mode, press S3 button 4
times to enter the second time zone mode.
2. Press S2 button to start the setting procedure.
The hour digits start flashing.
3. To adjust the value, press S1 button (+1 hour).
4. Press S3 button once to move on to the minute
setting.
5. To adjust the value, press S1 button (+30 minutes
or -30 minutes).
6. Press S2 button to confirm the setting.
7. Press S3 button to return to the normal time mode.
MINUTE SETTING BY PRESSING S1
(+30 MINUTES)
HOUR SETTING BY
PRESSING S1 (+1 HOUR)
SECOND TIME ZONE
NORMAL TIME
PRESS S3
4 TIMES
NORMAL TIME
PRESS S3
2 TIMES
ALARM MODE
HOUR SETTING BY
PRESSING S1
MINUTE SETTNG BY
PRESSING S1
TIME ZONE SETTING
BY PRESSING S1
S3
S2
S3
■
HOW TO SET ALARM TIME
1. You can set alarm with hours and minutes. When
the alarm is on, the alarm (BI-BI) sounds for 20
seconds at the preset time. Press S1, S2 or S3
button to stop the alarm after it starts sound.
Alarm is available in one time zone only (T1 or
T2).
2. From the normal time mode, press S3 button 2
times to enter the alarm mode.
3. To change the alarm setting, press S2 button. The
hour digits start flashing. To adjust the value, press
S1 button.
4. To move on to the minute setting, press S3 button.
To adjust the value, press S1 button.
5. To set the time zone, press S3 button. “AL. T1” or
“AL. T2” will flash. Select the time zone by pressing
S1 button.
■
HOW TO SET SECOND ZONE TIME
S2
S3
S3
S2
S3
S2
■
HOW TO USE TIMER
indicated hourly chime is on
indicated alarm is on
TO SET THE COUNTDOWN TIMER
1. From the normal time mode, press S3 button 3
times to enter the timer mode.
2. While in the timer mode, press S2 button. The hour
digit starts to flash.
3. Press S3 button to change the selection of setting.
3. Press S1 button to adjust the value. Holding S1
button down can fasten the process.
4. After you set the countdown time, press S2 button
to return to the timer mode.
■
ALARM & CHIME ON/OFF
PRESS S3
2 TIMES
NORMAL TIME
ALARM
From the normal time mode, press S3 button 2
times to enter the alarm mode.
Press S1 button to turn on or off the ALARM and
HOURLY CHIME signals.
■
HOW TO USE EL BACKLIGHT
In any mode press S4 button to illuminate the
display for about 3 seconds.
Note:
1. The backlight of the watch employs an electro-
luminescent (EL) light, which tends to lose
illuminating power after very long use.
2. The illumination provided by backlight may be
hard to see when viewed under direct sunlight.
S1
S1
S1
S1
S3
NORMAL TIME
TIMER
PRESS S3
3 TIMES
HOUR SETTING BY
PRESSING S1
MINUTE SETTING BY
PRESSING S1
S3
TO USE THE COUNTDOWN TIMER
1. Press S1 button while in the timer mode to start
the countdown timer.
2. Press S1 button again to stop the countdown
timer.
3. While in the timer mode, press S2 button to reset
the countdown time to its starting value and to
start to countdown automatically or while in the
timer mode, press S2 button and then press S1
button to reset the countdown time.
4. From 3 minutes prior to the expiry time, the alarm
(BI BI) beeps each time when the second digits
reach “0” or “30”.
5. Within 10 seconds to the expiry time, the alarm
(BI) beeps per second.
6. When the timer expires, the alarm (BI-BI-BI) beeps
for 10 seconds. It may be silenced by pressing S1,
S2 or S3 button.
SECOND SETTING BY
PRESSING S1
S3
SETTING IS COMPLETED
TIMER HAS EXPIRED
BEGIN COUNT DOWN
RELOAD
TIMER AND
SET
S2
S2
S1
S3
S2
S2
The batteries CR2016 and SR626SW which power
your watch should last approximately 2 years.
However, because they are inserted at the
factory, the actual life of the batteries once in
your possession may be less than 2 years.
Be sure to replace the batteries to prevent any
possible malfunction as soon as they run down. To
replace the batteries, we recommend taking the
watch to a local watch repair shop.
Note: If the alarm is used for more than 20
seconds a day, the hourly time signal more
than 24 times a day, the stopwatch more
than once a day and/or the illuminating
light for more than 1 second a day, the
battery life may be less than the specified
period.
■
BATTERY CHANGE
Printed in China
CAUTION
S1
to stop
This watch contains precise electronic
components. Never attempt to open the case or
remove the back cover.
• BATTERY
Do n ot expose the old battery to fire or
recharge it. Keep it at a place beyond the
reach of chil dren. If a child swallows it, consult
a doctor immediately.
• WATERRESISTANT
Condition
of use
Accidental
contact
with water,
such as
splashes
and rain
Swimming
and taking
a shower
Skin
diving
Scuba
diving
Indication
on the dial/
case back
No
Indication
* If your watch is 200 M/20 BAR, 100 M/10 BAR or
50 M/5 BAR water resistant, it is so indicated on
the dial/case back.
• Donotoperatethebuttonswhenthewatchiswet.
• Ifthewatchisexposedtosaltwater,rinseitin
fresh water and then wipe it thoroughly dry.
• Shouldyoufindanywaterorcondensationinside
the watch, immediately have it checked. Water
can corrode electric parts inside the case.
NO NO NO
YES YES NO NO
YES YES NO
NO
NO
NO
YES
WATER
RESISTANT
WATER
RESISTANT
(50M/5BAR
)
WATER
RESISTANT
100M/10BAR
or above
(
NO
Caution:
Leather straps are not water resistant except
so indicated, even if the watch head is water
resistant.
• ALLERGICREACTION
Because the case and band touch the skin
directly, it is important to clean them regularly. If
not, shirt sleeves may be stained and those with
delicate skin may develop a rash. Please wear
the watch with some play to avoid any possible
allergic reaction. If you develop a rash on your
wrist, stop wearing and consult a physician.
• MAGNETISM
Your watch will be adversely affected by strong
magnetism. Keep it away from close contact with
magnetic objects.
• SHOCKSANDVIBRATIONS
Your watch may be worn for normal sports
activities, but be careful not to drop it or hit it on
hard surfaces.
• TEMPERATURE
Your watch is preadjusted so that constant
accuracy may be insured at normal tem pera ture.
• CLEANING
Use only a soft cloth and clean water for
cleaning your watch. Never use chemicals, as the
waterproof gasket will corrode.
YES
■
CARE OF YOUR LORUS WATCH
■
SERVICE
When your LORUS watch requires repair or
servicing, please see the enclosed WARRANTY/
GUARANTEE.
(
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lorus Z022 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Lorus Z022

Lorus Z022 Bedienungsanleitung - Deutsch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info