Bedienungsanleitung Lotus Smartime 50002 (Seite 2 von 32) (Englisch)

740255

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

*Only charge the watch in the way shown. Incorrect charging may damage the watch.

Be aware that the two contacts of the USB cable are not allowed to contact the conductor at the same time, or it

will cause the circuit to burn.

1.3 Watch Face in standby mode:

1) Swipe right to open Notifications

2) Swipe down to open the drop-down menu to control brightness, enter settings, and Do not Disturb function.

3) Swipe up to open the main menu.

4) Press and hold the screen while in standby mode to change the watch face design. Select by tapping the

screen.

5) Tap once to display data on heart beats per minute, steps and calories.

1.4 Messages

Swipe right on the main screen to open Notifications. To enable notifications, connect the watch with the Lotus

SmarTime app and enable the relevant permissions. In the app, you can enable App notifications, Call

notifications and SMS notifications. When notifications are received on your phone, they will show up on the

watch, which can display up to 8 notifications.

1.5 Drop-down menu

Swipe down screen interface to open the drop-down menu.

1) The left icon shows Bluetooth connection status

2) Tap the middle icon to toggle Do Not Disturb mode. When Do Not Disturb mode is on, the device only vibrates

for the Find device and Alarms functions.

3) The right icon can be used to adjust the screen brightness.

4) Battery level is shown in the upper part of the screen.

1.6 Step count

The step counter is on by default. This interface displays the current number of steps on the watch. Steps are

counted starting from midnight. Swiping left you can find the data regarding distance covered and calories

burned.

1.7 Sleep

The sleep monitoring time period is from 21:00 to 9:00 the next day. After the sleep pattern has been recorded

on the device, sleep data is sent to the Lotus SmarTime app. Swiping left you can find data on the hours of light

and deep sleep.

1.8 Bluetooth music

Android: after connecting the watch via the phone settings, open the music player, play/pause and switch songs;

(no need to bind in the app, if it is already bound, please unbind it and connect in the phone settings)

IOS: When connected to your phone you can play, pause and switch songs directly via the watch.

1.9 Exercise tracking (walking, running, cycling, hiking, swimming, football, basketball, table tennis, badminton)

1.9.1 Select the exercise and tap the screen to start. After a brief countdown, activity tracking will start. You can

pause the exercise when needed. When you press the "□" icon, the exercise will be stopped and the activity data

is saved.

1.9.2 Activity data is saved for any exercise over 200 meters or lasting longer than 5 minutes. For smaller sessions

the device will prompt “Too little data to be saved”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lotus Smartime 50002 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info