8
Boat Setup Reset
If you want to access the Setup screen (Boat Setup) after an engine-
tank configuration has been chosen you will have to reset the
configuration to default settings.
To reset engine tank configuration:
1. Press MENU, highlight SYSTEM SETUP and press MENU.
2. Choose
ENG/TANK and press MENU twice. The following message will
appear: Hit menu to reset Eng/Tnk.
3. Press
MENU. The Setup screen will appear with Boat Setup
highlighted.
Fuel Remaining Source (FRem Src)
The Fuel Remaining source function allows you to select the device
used to measure the amount of fuel remaining in the tank. It will be set
to fluid level by default. The Fuel Remaining Source should be set to
fuel flow (Eng/FFlow) if you are going to use the EP-85R to monitor the
fuel remaining.
To set Fuel Remaining Source to Fuel Flow:
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU. Select FUEL MNGR and press MENU.
2. Highlight
FREM SRC and press MENU. That will open the FRem Src
menu..
3. Select
ENG/FFLOW and press MENU, which will take you back to the
main display.
NOTE:
If you select Fuel Level (Fluid Level) as the Fuel Remaining
Source, the EP-85R WILL NOT calculate Fuel Range.
Fuel Manager menu
The Fuel Manager menu allows you to adjust options used to measure
fuel economy. The following options can be set or reset from the Fuel
Manager menu: Refill Tank (Refill T), Part Fill (Partial Fill), Economy
Speed Source (Eco spd), Fuel Remaining Source (FRem Src), Reset Trip
Fuel (Rst trip F), Reset Seasonal Fuel (Rst Seas).
Refill Tank (Refill T)
Since the EP-85R is not connected to the tank, its fuel information is
not automatically updated when the tank is filled up. You must use the
Refill Tank command to ensure the fuel information in the EP-85R
