12
2. Press
MENU, select CUSTOMIZE and press MENU. The Position menu will
appear with two options: Top Data and Bottom Data.
3. Select the desired data position and press
MENU.
4. Highlight
FUEL USED (USD), TRIP FUEL USED (USD: TP) or SEASONAL FUEL
USED (USD: SE) and press MENU. A menu will appear, allowing you to
display data from a single engine or show data from all engines. (If
your unit is configured for one engine, you will be directed to the main
display.)
5. Select the desired engine or, to display data from all engines,
highlight Vessel and press
MENU. You will be taken back to the main
display, where the data you selected will be shown.
To customize Fuel Manager page:
1. After the Fuel Manager page has been added to the page screen
rotation, use the
UP and DOWN keys to display it on the screen.
2. Press
MENU, select CUSTOMIZE and press MENU.
3. Highlight
FUEL USED (USD), TRIP FUEL USED (USD: TP) or SEASONAL FUEL
USED (USD: SE) and press MENU. A menu will appear, allowing you to
display data from a single engine or show data from all engines on the
vessel. (If your unit is configured for one engine, you will be directed to
the main display.)
4. Select the desired engine or, to display data from all engines,
highlight Vessel and press
MENU. You will be taken back to the main
display, where the data you selected will be shown.
Fuel Warning
The Fuel Warning feature allows you to set a Low level or High level
alarm for each fuel tank. A pop-up window will appear and an alarm
will sound if the amount of fuel rises above (High Level) or falls below
(Low level) the selected percentage of tank capacity.
To set a fuel warning:
1. Press MENU, select SYSTEM SETUP and press MENU.
2. Highlight
BUS DEVICES and press MENU to display the Bus Devices list.
Select
STRG DEV (Storage Device) and press MENU. The Configuration
Options menu will appear with two options: Fuel Wrng and Reset.
3. Select
FUEL WRNG (Fuel Warning) and press MENU. If your unit is set
to a multiple engine configuration, the Select Engine menu will appear
with up to three options. (If your unit is configured for a single engine,
you will not see the Select Engine menu. You will be taken directly to the
Select Level menu.)