20
ENTER. The Position menu will appear with two options: Top Data and
Bottom Data.
3. Highlight the desired data position and press
ENTER.
4. Select
FUEL USED, TRIP FUEL USED or SEASONAL FUEL USED and press ENTER.
A menu will appear, allowing you to display data from a single engine
or from all engines on the vessel. (If your unit is configured for one
engine, you will be directed to the Position menu.)
5. Select the desired engine or, to display data from all engines,
highlight Vessel and press
ENTER. You will be taken back to the
Position menu. To display data in the other data box, repeat Steps 3-5.
6. Press
EXIT twice to return to the main display.
To customize Quad Digital page:
1. After the Quad Digital page has been added to the page screen
rotation, use the
ENTER and EXIT keys to display it on the main screen.
2. Press
MENU, use the UP and DOWN keys to select CUSTOMIZE and press
ENTER. The Position menu will appear with four options: Data Box 1,
Data Box 2, Data Box 3 and Data Box 4.
3. Highlight the desired data position and press
ENTER.
4. Select
FUEL USED, TRIP FUEL USED or SEASONAL FUEL USED and press ENTER.
A menu will appear, allowing you to display data from a single engine
or from all engines on the vessel. (If your unit is configured for one
engine, you will be directed to the Position menu.)
5. Select the desired engine or, to display data from all engines,
highlight Vessel and press
ENTER. You will be taken back to the
Position menu. To display data in another data box, repeat Steps 3-5.
6. Press
EXIT twice to return to the main display.
To customize Fuel Manager page:
1. After the Fuel Manager page has been added to the page screen
rotation, use the
ENTER and EXIT keys to display it on the main screen.
2. Press
MENU, use the UP and DOWN keys to select CUSTOMIZE and press
ENTER. The Position menu will appear with three options: Top Data,
Center Data and Bottom Data.
3. Highlight the desired data position and press
ENTER.
4. Select
FUEL USED, TRIP FUEL USED or SEASONAL FUEL USED and press ENTER.
A menu will appear, allowing you to display data from a single engine
or from all engines on the vessel.(If your unit is configured for one
engine, you will be directed to the Position menu.)
5. Select the desired engine or, to display data from all engines,
