29
4. Highlight
RESET SEASONAL and press ENTER. The following
confirmation message will appear: Are you sure you wish to Reset
Seasonal?
5. Highlight
YES and press ENTER. The Seasonal Fuel Used figure has
been reset to zero.
Displaying Storage Device data
The Overlay Data function will be used to show EP-85R Storage Device
data on your unit's main display. The storage device tracks Fuel Used,
Trip Fuel Used and Seasonal Fuel Used.
To add storage device as overlay data:
1. Press MENU, highlight OVERLAY DATA and press ENTER.
2. Select
(PRESS ENT TO ADD…) and press ENTER.
3. Highlight
NMEA 2000 and press ENTER. A list of devices on the
network will appear.
4. Select the desired storage device and press
ENTER. Fuel Used, Trip
Fuel Used and Seasonal Fuel Used categories will appear for each
engine.
5. Highlight the data you want to display and press
ENTER, which will
place a checkmark in its enabled box. It now will be shown as overlay
data on your unit's main display.
6. Repeat step 5 to display another data category, or press
EXIT
repeatedly to return to the main display.
NMEA 2000 Alarms
The NMEA 2000 Alarms menu allows you to set Full and Empty fuel
alarms for a number of NMEA 2000 devices. The alarms may be set to
a percentage (0-100%) of tank capacity.
To turn on/off NMEA 2000 Alarm:
1. Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER.
2. Highlight
NMEA 2000 ALARMS and press ENTER.
3. Highlight
FLUID LEVEL DEVICE and press ENTER. Select the desired
storage device and press
ENTER.
4. Highlight the
ENABLED box next to the desired alarm (Full Alarm or
Empty Alarm) and press
ENTER to turn on the alarm. When the alarm
is on an "X" will be placed in the Enabled Box.
5. To set the alarm percentage, press → to highlight
PERCENT and press
ENT.
