11
To unconfigure the EP-90R:
1. Press MENU, select SYSTEM SETUP and press MENU.
2. Highlight
BUS DEVICES and press MENU. Select a configured pressure
sensor and press
MENU.
3. The pressure sensor menu will appear. Highlight
UNCONFIG and press
MENU. The following message will appear: Hit Menu to Unset Dev
Name.
4. Press
MENU. You will be taken back to the Bus Devices list.
To reconfigure the EP-90R:
1. Press MENU, select SYSTEM SETUP and press MENU.
2. Highlight
BUS DEVICES and press MENU. Select a configured pressure
sensor and press
MENU.
3. The pressure sensor menu will appear. Highlight
RECONFIG and press
MENU.
4. Select
PTT:S (Pitot Speed), WTR:P (Engine Water Pressure), ENG:O:P
(Engine Oil Pressure), FUL:P (Fuel Pressure), BST:P (Boost Pressure),
TRN:O:P (Transmission Oil Pressure) or ATM:P (Atmospheric Pressure)
and press
MENU. The Select Engine menu will appear with up to three
options. (If your unit is set to a single-tank configuration, or if you
chose Pitot Speed or Atmospheric Pressure, you will be directed to the
Bus Devices list.)
4. Select the desired engine and press
MENU. You will be taken back to
the Bus Devices list.
Displaying Pressure Sensor Data
You can display pressure data on the Gauge, Single Digital, Dual
Digital and Fuel Manager pages.
Page Screen Rotation
The Page Screen Rotation consists of multiple pages that have been set
for display. Once pages have been added to the rotation, they can be set
to scroll across the screen automatically or manually. Press the
UP and
DOWN keys to manually scroll pages across the screen. Pressing the UP
key moves the scroll in one direction. Pushing the
DOWN key moves the
scroll in the other direction. You can use Autoscroll if you want the
pages to automatically scroll across the screen. Refer to your LMF -200
manual for information about Autoscroll.
