599178
124
Zoom out
Zoom in
Vorherige Seite
1/134
Nächste Seite
122
Troubleshooting
1. Before purchasing a pre-loaded mapping card for a unit,
go to our Mapping Index at http://www.lowrance.com/Prod-
ucts/Mapping/default.asp Click on the type of card you are
interested in and look at the list of units that are compatible
with that card.
2. When zooming in to see more detail, be sure the cursor is
located within the area covered by the mapping card.
3. In the Chart menu, select Chart Options and then Chart
Categories. Make sure all the categories you want to see
have a check mark beside them.
4. If the card is not recognized by the unit, make sure the card
contacts and corresponding unit pins are clean and free of
obstructions. Verify that the card is securely seated in the
card port.
5. If it is a card for a MapCreate map or saved GPS data, it
may need to be formatted. Do not format pre-loaded cards
such as Nautic-Path, Fishing Hot Spots Pro, Lake Master
Pro, Freedom Maps, or Navionics. The information will be
deleted from the card. Please be aware that Lowrance GPS
products will only read cards that are FAT formatted. MMC
cards formatted using FAT 32 or NTFS will not work with
our products.
1. First, make sure the unit is locked onto the satellites and
shows a x on the satellite status screen. Then check for
cross-hairs on the screen (or for an automotive unit, a red
box with an X). If this is on the screen, it means that you had
pressed one of the arrow buttons. If that is the case, the unit
thinks that you want to scroll to a location on the screen or
zoom in or out to see more detail. Press the EXIT button to
clear the crosshairs and your current position will show in
the middle of the display.
2. To determine your current position, the GPS receiver must
“lock” onto at least 3 GPS satellites. For the best signal re-
ception, an external GPS antenna/receiver should be locat-
ed where it can receive as many signals as possible. There
Current Position not on the Screen
Cards not Read by Unit
124

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lowrance HDS-10 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Lowrance HDS-10

Lowrance HDS-10 Kurzanleitung - Englisch - 6 seiten

Lowrance HDS-10 Installationsanweisung - Englisch - 52 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info