599356
20
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
18
27
I
[I
n
-
When the X-50 is first
turned
on,
the
digital
will
flash "0" until it has
"locked on"
to the bottom
signal.
Once it has
acquired
the bottom
depth,
it
will
display
the
depth
in the lower
left of the
display.
Figure
14
Figure
15
Figure
27
DIGITAL
BO1TOM DEPTH
There are three different sizes of the
digital
numbers for the
display,
small, medium,
and
large.
When first turned
on,
the
digital
number size is
medium. To
change
to a
different
size,
press 2nd,
7. A menu will
appear
(see figure 15)
and
you
will be
prompted
to
press
the 1
key
for small
digital
numbers,
2 for
medium, or 3 for
large digital
numbers. After
pressing
the
desired number on the
keyboard,
the menu will
disappear.
If
number
three,
"large digital"
is
selected,
the
chart will not be
displayed (see
Figure 16).
Instead,
the screen will be
cleared,
the bottom
depth
will be
displayed
in
large
digits, speed
and
temperature
will also be
displayed (if
turned
on),
and the
depth
alarm
settings
will be
displayed
at the bottom of the screen.
This
turns the X-50 into a
digital
sonar
only
and allows it to better
track the
bottom
signal.
One reason to use the
digital
in this manner would be if
you
are
going
to travel at
high speed
from one
part
of a
lake to another and
you
just
want to know the bottom
depth.
This will
give
both the fastest
possible
depth updates plus
an
easy-to-read display.
To
change
back into "normal"
mode,
simply press
2nd,
7
again
and
choose either
I,
small
numbers or
2,
medium
numbers.
The
digital display
can
be turned off
by
pressing
the DIGITAL
key
in
the DIGITAL SONAR
portion
of the
keyboard.
Figure
26 BOAT
SPEED
51
LOG
DIST LOG
If
the
optional speed sensor,
model
LSS-5 is attached to the
X-50,
then
total distance
travelled or
log
can
be
displayed
on the X-50's
screen.
To
display
the
log, press 2nd,5.
The
distance travelled since the X-50
was
last
turned on will be
displayed
in statue miles.
To reset the
log,
see the
COMMAND
function
key
instructions on
page
30. To turn the
log display
off,
press 2nd,
5
again.
9
FT/F A/M
FEET-FATHOMS-METERS
The X-50 can
display
the
depth
in
either
feet fathoms,
or
meters.
When it is first turned
on,
the
display
reads in feet
To
change
it to
fathoms
or
meters,
press
2nd,
9
(FT/FA/M).
A menu will be
displayed
on the
screen
(see
figure 27) indicating
that the
depth
is in feet
To
change
to
fathoms,
press
the 2
key
on the
keyboard,
or
press
3 to
change
to meters. For no
change press
the CLEAR
key.
After the selection
is
made,
the unit will
resume
operation.
PDF compression, OCR, web-optimization with CVISION's PdfCompressor
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lowrance X-50 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info