Bedienungsanleitung Luvion PLATINUM 2 (Seite 6 von 33) (Englisch, Holländisch)

532762

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

OVERVIEW OF PARENT UNIT

1. Antenna Receives the video and sound from the baby unit.

2. Antenna Locking Switch Slide the switch to the unlock position, to make the antenna pop

3. up. This will improve reception.

4. On/O button Turns the parent unit ON or OFF.

5. Talk Button Press this button to speak through the baby unit. When multiple baby units are

used, you will speak through the unit currently being displayed on the screen. When you

hold the talk button the talk icon

will appear on screen.

6. Charging indication LED The LED is red when the built-in battery is being charged and

turns green when it is fully charged.

7. DC in Connect the included DC 5V power adapter to power and/or charge the parent unit.

8. Battery compartment Screw open this compartment to replace the battery. Only replace

this battery with an ocial Luvion Platinum 2 battery.

9. Menu button Press this button to enter the main menu.

10. Navigation buttons The navigation buttons can be used when the system is in normal use

and/or when you are in the menu.

Normal use

• Press left

(A) to automatically switch between multiple cameras. The screen changes

channel every 3 seconds.

• Press right

(M) to switch manually between multiple cameras.

• Press up

(+) to increase the volume.

• Press down

(-) to decrease the volume.

• Press the OK button to go to the play list (when there is an SD card in the monitor).

Use in the menu

Press the

buttons to navigate in the menu. To conrm your selection press OK.

11. Coloured LEDs The rst green LED indicates that the monitor is switched on. The other

green/red LEDs indicate the volume level of the camera (from low to high).

12. LCD screen Displays the video from the baby unit.

13. Sound only button Press this button to switch to the sound only mode, or to return from

the sound only mode to the audio and video mode.

Note: When the Automute (sound activation) function is on there will be no sound until

noise activates the parent unit (see section Automute). For an “open channel” deactivate the

Automute function by pressing NO.

14. Record button Press this button to start recording, press the button again to stop.

15. Quad button Press this button to display the video of all 4 cameras simultaneously.

In the Quad mode, the screen displays cam 1, cam 2, cam 3 and cam 4 for each channel.

Please note that there is no sound in this mode. When there is no signal from the

baby unit or the signal is too weak the screen will display “out of range” on the

corresponding channel.

16. Next button Play the next lullaby.

17. Play/Stop button Press this button to start or stop playing a lullaby.

18. Nightlight button Press this button on the parent unit to remotely turn on/o the

1 2

3 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Luvion PLATINUM 2 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Luvion PLATINUM 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info