Bedienungsanleitung Lux Tools E-LS-2800-50 2 (Seite 22 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

688764

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Personal safety equipment

Your device at a glance

►P.3, item1

1. Rollers

2. Blower nozzle

3. Suction tube

4. Grip for front hand

5. On/Off switch

6. Speed regulator

7. Grip for rear hand

8. Adjustment lever (blowing, vacuuming)

9. Catch-sack

Scope of delivery

• Instructions for use

• Leaf blower/vacuum

• Catch-sack

• Shoulder strap

Assembly

►P.3, item2

1. Fit the two suction pipes sections together and

screw tightly.

2. Insert the suction pipe into the device and screw

into place.

3. Hook the shoulder strap onto the device as

shown.

Operation

Check before starting!

Check the safety equipment and the safe condition

of the device.

– Check all parts to make sure they fit tightly.

– Check whether there are visible defects: broken

parts, cracks, etc.

Attaching the cuttings bag

►P.4, item3

– Hook the collecting sack into the device as

shown with the front side and fold up at the han-

dle (10).

– Ensure that the bag has slotted into place

securely.

Attaching the extension cable

►P.4, item3

– Plug the unit plug into the connector of the

extension cable.

– Feed the extension cable through the strain relief

mechanism(12) as shown.

Selecting the operating mode

– Set adjustment lever(8) to vacuum[ ] or

blow[ ].

– When using as a leaf vacuum: Insert the collec-

tion bag (9) as shown into the device and ensure

that it clicks into place (►P.4, item3).

Setting the blower or vacuum speed

– Set the speed regulator (6) to the required blow-

ing or vacuuming speed.

Switching on and off

– Set the On/Off switch to position [1] to switch

the appliance on.

– Set the On/Off switch to position [0] to switch

the appliance off.

Cleaning and maintenance

Cleaning the device

• Brush off coarse dirt.

• Wipe down the device with a slightly damp cloth.

• Clean the catch-sack regularly

Removing the collecting sack

►P.4, item3

– Push the unlocking button (11) and fold the han-

dle (10) downwards.

Rectify clogging

►P.4, item4

– Release the locking screw (13).

– Fold up the housing cover (14) and remove any

blockage.

Unplug the mains plug before performing

any maintenance!

Risk of injury caused by rotating machine

parts!

Risk of injury caused by rotating machine

parts!

When working with the device, wear eye

and ear protection.

Wear sturdy shoes when working with the

device.

Wear protective gloves when working with

the device.

Wear tightly fitting clothing when working

with the device.

DANGER! Risk of injury! The device must

only be put into operation if no faults are

found. If any part of the device is defective,

it must be replaced before the next use.

Note: Work with leaf blowers/vacuums

may not be performed during normal quiet

hours.

DANGER! Risk of injury! Switch off the

product and disconnect the mains plug

before all cleaning and maintenance work.

Wait till all moving parts are completely

stopped.

Laubsauger_Elektro_115158.book Seite 22 Donnerstag, 10. November 2016 2:03 14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lux Tools E-LS-2800-50 2 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info