Bedienungsanleitung LX NAV LX 8000 (Seite 30 von 118) (Englisch)

541008

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

eliminate airspace which is going to be too high for the day. For example, if the forecasted

cloud base is to be 1500 m, set this value to 1600 m and your screen will be much more

readable.

Press the DEFAULT button to reset these settings back to default.

5.1.6.3 Way Points and Airports

The way point and airport look and feel is defined in this dialogue. Check the show

waypoints item to enable way points and airports display in navigational pages. If this item

is unchecked no way points will be displayed.

The Max.visible item defines how long way point labels and detailed symbols are shown. If

the maximum number of way points on the current screen is more than the defined value

only small blue dots will be shown for way points and no labels will be drawn.

Font style, colour and size can be defined using the Font style and colour item and the

Font size item. When editing style, turning the lower-left knob will change the font colour.

Way point labels can be setup to give even more detail. Label details can be defined for

each individual way point type.

A label consists of two selectable values: upper label and lower label. If you prefer to have

labels in single line, the single label checkbox should be checked. A label can also be

coloured. Check the Colorize label item. Coloured labels are drawn with a green

background when the way point is within range with the current MacCready settings and

with a yellow background when way point is within reach with MacCready setting zero. No

background is shown if the way point is not reachable.

The label is selected from following options:

• Name: way point name is shown. The name length item controls how the name is

displayed.

• Code: will display the ICAO code or short name.

• Elevation: shows way point elevation.

• Arrival altitude shows arrival altitude taking into account current MacCready setting,

safety altitude and current wind. Due to complexity of the calculation it will not take the

wind profile into account.

• Required altitude shows how much height is needed to reach the point. Required

altitude takes into account current MacCready setting, safety altitude and current wind.

Due to complexity of the calculation it will not take the wind profile into account.

• Required Mc gives an estimate of the maximum MacCready value which we can use to

reach the point.

• Required L/D shows the required glide ratio to the point taking into account the safety

altitude.

• Frequency will display the point frequency, if available.

Press the DEFAULT button to reset these settings back to default.

5.1.6.4 Glider and Track

The LX8000 can show the coloured path flown, current track vector and target vector with

terrain collision warning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LX NAV LX 8000 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von LX NAV LX 8000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info