541008
46
Zoom out
Zoom in
Vorherige Seite
1/118
Nächste Seite
Competition mode is intended only for competitions. If this mode is enabled the pilot will
not be able to see any Flarm data on the LX8000 map. The competition mode status is
recorded in the IGC file and can be checked during scoring.
If you are flying in a competition it is sufficient to turn on Competition mode.
However if you do not want other aircraft to see you, you should switch mode to
Privacy ON.
Reduce warnings will significantly reduce Flarm warnings. Use this option if you are flying
in gaggles or areas with high density of other aircraft.
We recommend you sign in at FLARMNET.org. This is free of charge. Registering
with FLARMNET allows others to see you not only with Device ID but also with
your contest number and name. Refer to Chapter 5.5.5.7.
5.1.12.4 Compass*
When a compass is connected to the LX8000 calibration is crucial for correct operation.
Refer to Chapter 10.4 for details about installation of the compass and its calibration.
5.1.12.5 Rear Seat or Front Seat
In a two-seat configuration with the LX8000D it is possible to transfer selected data between
the front and rear seat devices. Use this menu to define which data will be automatically
received from the other device.
Data are divided into two groups; flight parameters and navigational data. If a specific value
is checked this value will be automatically received from the other device.
Check MacCready, Ballast or Bugs to receive current MacCready value, current ballast
setting or bugs from other device.
If the Waypoint checkbox is checked a new way point target will be automatically assigned
when the user changes the way point target on other device. The message
“Waypoint
target received”
will be displayed on the screen and you will be navigating to the same way
point as other device. Please note that it is not necessary to have this way point in your
databases as the complete way point information is transferred.
If the Waypoint checkbox is not checked it is still possible to send a target to the other
device using the SEND action in way point mode.
46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LX NAV LX 8000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von LX NAV LX 8000

LX NAV LX 8000 Bedienungsanleitung - Deutsch - 158 seiten

LX NAV LX 8000 Kurzanleitung - Holländisch - 15 seiten

LX NAV LX 8000 Bedienungsanleitung - Holländisch - 81 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info