541008
59
Zoom out
Zoom in
Vorherige Seite
1/118
Nächste Seite
Flarm will display a list with all visible Flarm objects. You can select one and use it for
navigational purposes.
Rot.FAI will rotate the FAI area if it is enabled. This option is not shown if it is not
enabled.
Event is used to log an event. The recording rate will be increased to 1 second for one
minute. A message
“Event marked”
will be displayed on the screen.
Send is available only when we have a two-seat configuration with a LX8000D. Press
this button to send the current navigational point to the rear seat device. This action will
force a change of navigational target for the selected navigation mode on the rear seat
device.
Night will reduce backlight to level acceptable for flying in very dark conditions.
Off will switch off the instrument. The message
“LX8000 is shutting down. Please wait.”
will be displayed.
The LX8000 can also be powered off by pressing the upper-left button until the
message “switching off” appears.
5.5.5.1 Select an Airport
There are two methods of selecting: filter mode and list mode. You can toggle between
these two modes by pressing the LIST or FILTER buttons. Selecting an airport in filter
mode is straightforward. Enter the first letter of the airport name using the lower-right
knob. The helper will show the first airport matching this letter and the next few airports will
be displayed in lower part of screen.
Press the CHAR>> button and cursor will move to the second letter. Use the lower-right
knob to select the second letter. If you wish to return to the first letter turn the lower-left
knob anticlockwise.
You will note that part of the airport name is written in a darker colour. Once it becomes
white it means this is the only selection. Pressing GOTO will navigate directly to it. If there
are more than one airports starting with the filtered letters and you press the GOTO button
the cursor will jump to the beginning of the airport name. The lower-right knob will select
among the airports. Press GOTO once more and you will navigate to it.
59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LX NAV LX 8000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von LX NAV LX 8000

LX NAV LX 8000 Bedienungsanleitung - Deutsch - 158 seiten

LX NAV LX 8000 Kurzanleitung - Holländisch - 15 seiten

LX NAV LX 8000 Bedienungsanleitung - Holländisch - 81 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info