541008
69
Zoom out
Zoom in
Vorherige Seite
1/118
Nächste Seite
When any of the six buttons are pressed functions for the buttons are shown. If the
selected button is pressed once more the selected action will take place. Press the
MORE>> button to see more options. If the remote stick is available the behaviour is
slightly different. When the check button is pressed on the remote stick menu will appear
instead of the button functions.
Edit action is used to edit the task. This is the one and only task that will be declared
and will be available for navigation.
Mc/Bal action will set MacCready, ballast and bugs see Chapter 5.5.5.2 for more
details.
Move action is used in assigned area tasks to move the navigation point inside the
selected assigned area.
Restart is used to restart a task. This action is available only when flying.
Start or Next option is used to start a task or to advance to the next turn point.
Mark is used to mark the current position and create a way point.
Flarm button will display a list with all visible Flarm objects. You can select one and use
it for navigational purposes.
Map is used to change quickly and modify map parameters see Chapter 5.5.5.3 for
more details.
Wind will open a dialogue where wind changes with altitude are shown, wind can be set
and methods for wind calculation are shown. See Chapter 5.5.5.4 for more details.
Airspace shows a list of airspace zones in the vicinity of the current position. See
Chapter 5.5.5.5 for more details.
Rot.FAI will rotate the FAI area if it is enabled. This option is not shown if it is not
enabled.
Event is used to log an event. The recording rate will be increased to 1 second for one
minute. A message
“Event marked”
will be shown on the screen.
Send is available only with two-seat configurations with the LX8000D. Press this button
to send the task to the rear seat device. This action will force a change of task on the
rear seat device.
Night will reduce backlight to level acceptable for flying in very dark conditions.
Off will switch off the instrument. The Message
“LX8000 switching off”
will be
displayed.
69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LX NAV LX 8000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von LX NAV LX 8000

LX NAV LX 8000 Bedienungsanleitung - Deutsch - 158 seiten

LX NAV LX 8000 Kurzanleitung - Holländisch - 15 seiten

LX NAV LX 8000 Bedienungsanleitung - Holländisch - 81 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info