541008
83
Zoom out
Zoom in
Vorherige Seite
1/118
Nächste Seite
There is no need to press START inside the start observation zone. You may
press it any time after leaving the start observation zone or crossing the start line.
The LX8000 will always take the correct time as start time.
If for some reason you miss the start message you may always start the task by pressing the
START button. Go to task mode and press any button. In the top row the START button is
shown. Press this button and navigation will be advanced to the next turn point.
In case you change the task in the air and you are already flying towards first turn point you
will still be able to start a task. Press the START button and a message dialogue to confirm
task start will be opened.
7.2.2 Restarting Task
If for some reason you decide to abandon the task and you would like to restart the task go
to task mode and press any button. In top row the RESTART button is shown. Press it.
You have to confirm restarting of the task. Once the task is restarted navigation will be
changed back to start point.
7.2.3 Over Turn Point
When a turn point observation zone is reached the message
“Inside zone”
will be displayed
and the task will auto advance to the next turn point if the Auto next option was selected
(see Chapter 5.7.3).
When the Auto next option was not selected the message NEXT will be displayed. Press
the associated button to advance to the next turn point. If for some reason you missed this
message you can always advance the task to the next turn point by pressing the NEXT
button. Go to task mode. In the upper row the NEXT button is shown. Press this button
and navigation will be advanced to next turn point.
In case you did not reach turn point and you wish to continue navigation towards the next
point anyway press the NEXT button.
A message will appear. If you confirm this with YES the task will be advanced to the next
turn point and it will recalculate the task taking the optimal fix as the task point.
83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LX NAV LX 8000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von LX NAV LX 8000

LX NAV LX 8000 Bedienungsanleitung - Deutsch - 158 seiten

LX NAV LX 8000 Kurzanleitung - Holländisch - 15 seiten

LX NAV LX 8000 Bedienungsanleitung - Holländisch - 81 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info