541011
76
Zoom out
Zoom in
Vorherige Seite
1/151
Nächste Seite
LX90xx system Version 4.0 February 2014
Page 76 of 151
the pilot of the maximum take-off weight. Empty weight is weight of the glider without
pilot and ballast. The overload factor is calculated as:
weightgliderREFERENCE
ballastWaterweightPilotweightgliderEmpty
overload
..
....
Pilot weight is set in the Flight recorder menu (see Chapter 6.1.2).
For aircraft with flap, it is also recommended to enter flap position labels and speed range
for corresponded flap position. Speed range shall be given for reference wing load or
reference weight.
Once speed range is entered, the system will be able to display requested flap position
based on current wing loading and g-factor.
6.1.14 Profiles and Pilots
All settings and navigational page layouts are stored in a profile. Profiles can be used in
different ways:
For club operation or multiple pilots sharing the same glider. Each pilot can have his
personal profile.
When the user is flying a glider which can have a different wing spans. In this situation
the pilot has two profiles, one for each configuration.
When a pilot is flying in several different locations. A separate profile for each location
can be created (examples: France, Spain, Namibia, WGC2014).
Profile consists of two parts:
Navigational page layout defines which navboxes and symbols are visible on
navigational page. It defines colour of navboxes, font sizes and colours, how many
navigational pages are visible and which modes are enabled. Navigation page layout
can be setup with LX Styler or on device itself (See chapter 7).
Device settings includes glider polar, selected databases, selected airspace and
waypoints file, map colours, vario indicator settings and flight computer properties.
Device settings can be modified on device itself through setup menu (See
chapter 6.1) or with LX Styler.
An active profile is selected when the system is powered on (see Chapter 8.1.2).
Use this dialogue to add a new profile, delete a profile, load/save a profile, copy device
settings, change name for an existing profile and to activate a profile. The active profile is
the profile which is currently being used. Select a profile using PAGE selector knob. Press
TO USB or TO SD for the profile will be stored to a USB stick or SD card. A profile is stored
76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LX NAV LX9070 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von LX NAV LX9070

LX NAV LX9070 Bedienungsanleitung - Holländisch - 150 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info