Bedienungsanleitung Lynx E44 (Seite 47 von 56) (Englisch)

586998

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

3. By default switch 4 is labeled “Prom 2” and is ON be default. Switch 3 is labeled Prom 1

and is OFF by default. Simply turn switch 4 to the OFF position, and switch 3 to the ON

position. In other words, prom 2 is OFF and Prom 1 is ON.

4. Return the card to its slot, plug in and turn on the computer.

5. If the OS now recognizes the card, run the latest firmware updater for the card

6. When complete, shut down computer.

7. Remove the AC cord, remove the card, and set the switches back to their original position.

Prom 2 is ON, and Prom 1 is OFF.

8. Reinstall the card and boot into the OS. The card should now operate with the current

firmware.

If the card still is not seen with the jumper on Prom 1, there is either a problem with the card

or the computer's PCIe slot. Contact Lynx Technical Support.

8.5 Volume Control Settings Application (Windows Only)

This program allows control of the Lynx Mixer Master Output

Volumes from the computer keyboard, regardless of which

application is currently running in the foreground. It is not

required for the Lynx Mixer to be open for the Volume Control

Settings program to function.

To launch this program, right-click on the Lynx Tray Volume icon in the taskbar and select

"Volume Control Settings...". With this program, it is possible to program custom key

combinations that control mixer volume functions. When the driver is first loaded, no default

key values are programmed. You must manually have the program learn which key sequence

you wish to control Volume Max, Volume Up, Volume Down and Mute. To do this, Activate

the first key sequence group by clicking the "Active" check box on the first row. Next, select

which master output volumes you wish to use. This app works for all Lynx cards, so 16

channels are displayed. For the E44, simply ignore channels 9-16, and for the E22 ignore

channels 5-16. Shift-click allows selection of two adjacent channels and Ctrl-click selects all

16 channels. Press the "Learn" button for the first volume command that you wish to

program, and then press the key sequence you want to control that volume function. The key

combination will be confirmed in the "Assigned Key:" box. Close the program once the key

sequences you require have been learned.

You may quickly launch the Lynx Mixer application by double clicking the left mouse button

on the Lynx Tray Volume icon.

PLEASE NOTE: It is possible to program a key sequence that already has a meaning for the

operating system or for a specific application. In this case, Windows will only send these

commands to the Volume Control Settings program, and the key sequence will no longer

function for the other application(s). We suggest programming key combinations that utilize

Shift and Ctrl keys to minimize the likelihood of accidentally using a sequence that is

meaningful to some other application. For instance: CTRL + SHIFT + UP ARROW for

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lynx E44 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info