Bedienungsanleitung Lynx Hilo TB (Seite 6 von 68) (Englisch)

586999

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Page 2

1.4 Power and Safety Information

To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Do not block any of the ventilation

openings. Do not defeat the safety purpose of the grounding-type plug. A grounding type plug has two blades and a

third grounding prong. The third prong is provided for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched,

particularly at the plugs, convenience receptacles, and the point where they connect to the Hilo. Unplug this device

during lightning storms or when unused for long periods of time.

Hilo utilizes a state-of-the-art universal power supply. The power supply will auto-detect the voltage from 100V to

240V and conform appropriately. No manual voltage adjustment is necessary.

1.5 Rack-Mounting

Hilo can be mounted in standard studio equipment racks using an optional two-space rack shelf available from Lynx.

1.6 Operation Requirements

To operate Hilo successfully with your existing equipment, first let’s verify that you have compatible elements for best

results.

1.6.1 Audio Equipment Requirements

Hilo features a wide variety of audio I/O formats. Compatibility with these formats are, of course, only important for

I/O ports that you intend to use.

• Headphones: The Hilo headphone jack (PHONES) is suitable for driving stereo headphones through a ¼”

TRS connection. Any standard set of headphones should work with Hilo.

• Line Inputs and Outputs: Hilo can operate with balanced or unbalanced, line-level analog audio equipment

(power amps, powered speakers, headphone amps, microphone pre-amps, mixing boards, etc.) operating at

trim levels of +18 dBu; +20 dBu; +22 dBu; +24 dBu; +0 dBV; +2 dBV; +4 dBV and +6 dBV . The LINE INs

and LINE OUTs use XLR connections.

• Monitor Outputs: The Hilo MONITOR outputs can operate with balanced or unbalanced, line-level analog

audio equipment and use ¼” TRS jacks.

• AES/EBU Inputs and Outputs: The Hilo AES IN and OUT ports should work with any AES/EBU

compatible device at standard sample rates between 44.1 kHz and 192 kHz. The AES ports utilize XLR

connections.

• SPDIF Inputs and Outputs: Hilo supports coaxial (electrical) SPDIF connections on RCA jacks, or SPDIF

Optical signals on Toslink connections.

• ADAT Lightpipe: Hilo’s Toslink Optical connector (S/PDIF/ADAT OPT.) can be software switched

between 2-channel SPDIF operation and 8-channel ADAT Lightpipe operation. When ADAT is selected, each

input and output port supports up to eight channels at sample rates of 44.1 kHz and 48 kHz, four channels at

sample rates of 88.2 kHz and 96 kHz, or two channels at sample rates of 176.4 kHz and 192 kHz.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lynx Hilo TB Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info