586988
7
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
Page 7
Windows NT/2000/XP® Installation
The procedure for installing the Lynx L22 in Windows NT/2000/XP requires that you
install your Lynx L22 inside your computer before the Lynx L22 Setup Program is run.
This program will install all the required driver files and the Lynx L22 Mixer application
as well as configure your system to recognize the Lynx L22.
Installing the Lynx L22
1. Turn OFF the power to your computer system and disconnect the power cords.
2. Touch a metal plate on your computer system to ground yourself and discharge
any static electricity.
3. Remove the cover from your computer system case. You should refer to your
computer system documentation for any special instructions on installing expansion
cards and peripheral equipment.
4. Find an empty PCI slot in your computer.
5. Unscrew and remove the slot cover from your selected PCI slot.
6. Remove your Lynx L22 from its static bag and gently insert it into the selected
PCI slot. Press it down firmly so that the contacts are securely seated in the slot.
7. Secure the Lynx L22 card with the screw removed from the slot cover.
8. Replace the computer system case and plug in your computer.
9. Connect the L2Audio and L2Sync cables to the Lynx L22. See the External
Connections section for more information.
Running Setup
1. Turn on your computer and start Windows.
2. When Windows 2000/XP loads, you will receive a “Found New Hardware”
notification followed by a “Found New Hardware Wizard” window. Press “Cancel”
to continue. Windows NT 4 will not give this notification.
3. With Windows running, insert the 3½” floppy supplied with your Lynx L22 into
your computers floppy disk drive.
4. Select “Start” from your system menu, then “Run…”.
5. Type A:\SETUP.EXE into the Run window and select the OK button.
6. The “LynxTWO/Lynx L22 Windows NT Driver Installation Wizard” will appear.
7. After reading the instructions on the screen, press “Continue”.
8. The Driver Installation Wizard will copy all of the files needed to the appropriate
directories.
9. When the “Installation Complete” message appears, read the instructions on the
screen, then press “Close”.
10. Please read the “Release Notes” in the startup menu “Lynx Studio Technology”
group.
Installation
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lynx L22 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info