587003
26
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
Page 23
9.1.2.2 Per Channel Routing
In addition to global routing, an LT-MADI equipped Aurora is capable of routing MADI streams
to Aurora Analog and Digital outputs on a per-channel basis. MADI streams can also be
duplicated across multiple Aurora outputs. For instance, MADI input 1 and 2 can be routed to
Analog outputs 7 and 8, while MADI inputs 3 and 4 can be routed to Analog outputs 5 and 6
AND Digital out 1 and 2 at the same time.
Per-channel routing can only be initiated from the Aurora Remote Control software. The Aurora
Remote Control (ARC) application allows control of Aurora parameters from a convenient
software interface. It also provides accurate real-time metering for the Analog and Digital inputs
and outputs.
The ARC software can operate on an OSX or Windows PC computer via a Lynx AES16 audio
interface or MIDI. The software is available on the Lynx Installation CD, or can be downloaded
from www.lynxstudio.com
> Support > Downloads.
9.1.2.2.1 Aurora Remote Control Software
The Aurora Remote Control (ARC) application allows control of Aurora parameters from a
convenient software interface. It also provides accurate real-time metering for the Analog and
Digital inputs and outputs.
After installation, the ARC can be run from the “Lynx Studio Technology” program group on a
Windows machine, or from “Applications” on an OSX installation.
The Aurora Remote Control Application allows the user to control output levels, route inputs to
outputs, change parameters, and view accurate meters for inputs and outputs on a connected
Aurora. Most parameter changes will be reflected both on the Aurora front panel and within the
software application.
Global routing can be set identically from the Aurora front panel or from the ARC application.
The selections available for TO ANALOG OUT and TO DIGITAL OUT are “ANALOG IN”,
“AES IN” and “LSLOT IN”. Additionally these buttons can be set to “Remote” mode by
pressing the appropriate button until the LEDs for all three choices are illuminated or by
selecting “Remote” as the source from within the ARC Digital I/O and Settings page.
In “Remote” routing mode, the Volume faders in the ARC become active, and audio signals can
be routed on a per-channel basis. Routing and volume controls for the Analog Outputs are
initiated from the “Analog I/O” page, and for the AES/EBU Digital Outputs from the “Digital
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lynx LT-Madi wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info