Bedienungsanleitung M-Audio Code 49 (Seite 8 von 52) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

707282

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

21. Transpose: Press and hold this button and press one of the Pad Octave –/+ or Key Octave –/+

buttons to move the pads or keys (respectively) down or up a semitone.

Press and hold Shift and press this button to send a “MIDI Panic” message. This means all MIDI

notes will stop and all controls will stop sending their messages.

22. X/Y Pad: This touch-sensitive pad lets you control two parameters simultaneously in a two-

dimensional way (rather than a traditional one-dimensional modulation wheel). You can assign

the parameter and range of each axis, X (horizontal) and Y (vertical). This pad can be in one of

three modes as determined by the X-Mode and Y-Mode buttons.

23. X/Y Buttons: Press one of these buttons to send the minimum value for the parameter assigned

to that axis.

Press and hold Shift and press one of these buttons to send the middle value for the parameter

assigned to that axis (e.g., a MIDI value of 64—halfway between 0 and 127).

In Edit Mode, press one of these buttons when assigning a parameter to assign it to that axis: X

(horizontal) or Y (vertical).

In HID Mode, use the X or Y button as a left-click or right-click mouse command (respectively).

24. X-Mode / Y-Mode: Press one of these buttons to cycle through the available modes for that

axis of the X/Y Pad, distinguishable by the button’s color:

Red: MIDI CC Mode (the axis is assigned to a MIDI CC number)

Pink: In MIDI Note Mode (the axis is assigned a range, scale, or group of MIDI notes)

Yellow: HID Mode (the axis lets you use the X/Y Pad as a mouse/track pad)

Learn more about these modes in the User Guide.

Rear Panel

1. Power Input: If you do not want to use a

computer in your setup (i.e., if you are using

Code 49 to control an external MIDI module),

connect Code 49’s power input to a power

outlet using an optional power adapter (9

VDC, 1 A, center-positive, sold separately).

Alternatively, you can connect Code 49’s

USB Port to a power outlet using a standard

USB charger (sold separately).

2. Power Switch: Press this button to power the Code 49 on or off.

3. USB Port: Use a standard USB cable to connect this USB port to your computer. The

computer’s USB port provides ample power to Code 49. This connection is also used to send

and receive MIDI data to and from your computer.

This connection is also relevant to Code 49’s MIDI Out and MIDI In:

• If an external device is connected to the MIDI Out, your computer can send MIDI messages

out along this path: computer  Code 49  external device.

• If an external device is connected to the MIDI In, the external device sends MIDI messages

in along this path: external device  Code 49  computer. MIDI messages can then be

sent to an external device via the MIDI Out, but it must pass through the computer first.

4. Sustain In: Connect an optional 1/4” (6.35 mm) TS sustain pedal to this input.

You can also change this input’s MIDI assignment. See the User Guide to learn how to do this.

5. Volume In: Connect an optional 1/4” (6.35 mm) TRS expression pedal to this input.

You can also change this input’s MIDI assignment. See the User Guide to learn how to do this.

6. MIDI In: Use a standard five-pin MIDI cable to connect this MIDI In to the MIDI Out of an

external MIDI device (e.g., another MIDI controller). The MIDI messages sent to this MIDI In will

be sent to your computer via the USB port.

7. MIDI Out: Use a standard five-pin MIDI cable to connect this MIDI Out to the MIDI In of an

external MIDI device (e.g., a synthesizer, sequencer, drum machine, etc.).

8. Kensington

Lock Slot: You can use this slot to secure your Code 49 to a table or other surface.

678

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

M-Audio Code 49 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von M-Audio Code 49

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info