Bedienungsanleitung M-Audio Keystation 49 MK3 (Seite 6 von 72) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

707308

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Configuration

Once you have finished installation you will need to configure your MIDI software to use the

Keystation 49 MK3. Please note that when you press a key on the keyboard, you will not hear

any sound. This is because pressing a key causes the keyboard to send out MIDI data. MIDI

data gives instructions on how a sound should play, but in order to actually hear that sound

you need to configure your music software to read the MIDI data being sent from the

Keystation and play the sound back accordingly. This setup will more than likely entail going

into an Options or Device Set-Up menu in your music software application and selecting the

appropriate device. The Keystation 49 MK3 should appear under the name “USB Audio

Device” for Windows 7, Windows 8, or as “Keystation 49 MK3” for other operating systems in

the MIDI devices section of your music software application. Please consult the manual that

came with your software for the proper setup procedure.

Features

Top Panel

1. Keyboard: Most of the white keys and black keys

on the Keystation are labeled with names. When

in the Advanced mode, pressing any of the

labeled keys will allow for special operations such

as adjusting the MIDI channel, transposing, and

sending program change messages.

2. Octave Buttons: If you press the octave “+”

button once, the LED above the octave “-” button

will turn off, indicating the keyboard’s octave is

now shifted up. If you press the octave “+” key

again, you will shift one more octave up, and so

on. It is possible to shift the keyboard up 4

octaves or down 4 octaves from 0 octave shift.

To shift the octave down, press the octave “-”

button and notice that the LED above the octave

“+” turns off. If only the LED above the octave “-” key is lit, the octave is shifted down

and, if only the LED above the octave “+” key is lit, the octave is shifted up. The octave

“+” and octave “-” LEDs will change color when moving up or down more than one

octave.

To return the octave shift to 0, press both the octave “+” and “-” keys together. Both

LEDs will light, indicating that the octave shift has returned to 0.

The Octave “+” and “-” buttons may be assigned to control one of seven possible MIDI

functions. (See Advanced Functions for more information.)

3. Volume Slider: The Volume Slider sends a MIDI message that controls the volume of the

notes you are playing. The Volume Slider can also be assigned to different effects such

as pan (balance), attack, reverb, chorus and many more. (See Advanced Functions for

more information.)

4. Pitch Bend Wheel: As the name indicates, the pitch bend wheel is primarily used to

bend the notes played on the keyboard up or down. This allows you to play phrases not

normally associated with keyboard playing, such as guitar-style riffs. Your sound source

determines how far you can bend the note. The usual setting is two semitones, but it can

be up to two octaves up or down.

4 5

7 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

M-Audio Keystation 49 MK3 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info