Bedienungsanleitung M-Audio Keystation Mini 32 MK3 (Seite 7 von 88) (Englisch)

707323

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Program Change

Program Changes are used to change the instrument or voice you are using. For example, you could use

this function to change the instrument to a bass sound.

You can send a program change by:

• Sending an Incremental or Decremental program change using the Octave buttons in conjunction with

the “Data=Program” key, which lets you step through each program number in either direction.

If your MIDI hardware or software can receive MIDI Program changes, the buttons will increment or

decrement between 0 and 127.

– or –

• Entering the program number using the numerical keys (0 - 9) in conjunction with the “PROGRAM” key

on your Keystation Mini 32 MK3.

Both methods are explained below:

To send Incremental or Decremental Program Change messages:

1. Press the Edit button to engage Edit Mode. The Edit button light will illuminate to full brightness.

2. Press the “Data=Program” key, which is the black key above F (F#, 3rd black key from the left).

3. The Edit Mode button will return to half brightness as soon as the “Data=Program” key has been

pressed.

4. Press the Octave “+” or “-” button to step upwards or downwards through the sounds while

continuing to play notes, until you find the instrument you want to use.

Pressing the “+” and “-” buttons simultaneously will recall Program 0, which selects a grand piano sound if

you are playing a General MIDI (GM) Instrument.

The Data=Program assignment is retained when the keyboard is turned off. However, the setting is not.

To send a Program Change message using the numerical keys:

1. Press the Edit button to enter Edit Mode. The Edit button will illuminate to full brightness.

2. Press the “PROGRAM” key (F#, 6th black key from the right).

3. Use the numerical keys (0 - 9) to enter the program number for the instrument you wish to play.

4. Press the “ENTER” key (G, last white key on the right) to exit Edit Mode. The Edit button will return to

half brightness indicating that programming is complete.

If you have made an error while entering the numerical data value, press the CANCEL key (C, first

white key on the left). This exits Edit Mode without sending a program change message.

To return Program function to the default setting (Program 0):

1. Press the Edit button to enter Edit Mode. The Edit button will illuminate to full brightness.

2. Press the “PROGRAM” key (F#, 6th black key from the right as indicated in the graphic above).

3. Press the “DEFAULT” key (C, 8th white key from the left). The Edit light will dim to half brightness

indicating that programming is complete.

The program change message has been sent, selecting the default value of General MIDI Instrument

“0” (Grand Piano).

Cancel

MIDI Panic

Data: Octave

Data: Transpose

Data: Program

Data: Bank LSB

Data: Bank MSB

Data: Channel

Data: Tuning

Program

Bank LSB

Bank MSB

Modulation Assign

Knob Assign

Pitch Bend Assign

Pitch Bend Rate

Modulation Rate

Velocity

Sustain Mode

Default

Enter

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

M-Audio Keystation Mini 32 MK3 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von M-Audio Keystation Mini 32 MK3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info