Bedienungsanleitung M-Audio Keystation Mini 32 MK3 (Seite 13 von 88) (Englisch)

707323

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

To adjust the Pitch Bend Rate:

1. Press the Edit button to engage Edit Mode and the Edit button light will illuminate to full brightness.

2. Press the “PB RATE” key (E, 3rd white key from the left).

3. Press E (10th white key from the right) to enter “1.”

4. Press F (9th white key from the right) to enter “2.”

5. Press D (4th white key from the right) to enter “7.”

If you make an error while entering the value, press the “CANCEL” key to exit Edit Mode without making

any changes. As an alternative to steps 3 through 5, you can use the “+” and “-” buttons to change the

value.

6. Press the “ENTER” key (G, last white key on the right); the Edit light will dim to half brightness indicating

that programming is complete.

7. Press the “PB>” button while playing to hear how the Pitch Bend will occur faster than before.

The PB Rate setting is retained when the keyboard is turned off.

To return the Pitch Bend Rate to the default setting:

1. Press the Edit button. The Edit button light will illuminate to full brightness.

2. Press the “PB RATE” key (E, 3rd white key from the left).

3. Press the “DEFAULT” key (C, 8th white key from the left). The Edit light will dim to half brightness

indicating that programming is complete.

Volume Knob

To assign the Volume Knob to an effect:

1. Press the Edit button. The Edit button light will illuminate to full brightness.

2. Press the “KNOB ASSIGN” key (F#, 1st black key from the right).

3. Use the Numerical Data Entry keys (0 - 9) to enter the number of the parameter you want to assign to

the Volume Knob.

If you have made an error while entering the parameter number, you can press the “CANCEL” key (C,

first white key on the left) to exit Edit Mode without making any changes. As an alternative to step 3,

you can use the “+” and “-” buttons to change the parameter.

4. Press the “ENTER” key (G, last white key on the right); the Edit light will dim to half brightness indicating

that programming is complete.

5. Move the Volume knob clockwise to increase the parameter value.

The Volume Knob assignment is retained when the keyboard is turned off.

To return the Volume Knob to its default parameter (07 - Volume):

1. Press the Edit button. The Edit button light will illuminate to full brightness.

2. Press the “KNOB ASSIGN” key (F#, 1st black key from the right).

3. Press the “DEFAULT” key (C, 8th white key from the left). The Edit light will dim to half brightness

indicating that programming is complete.

Cancel

MIDI Panic

Data: Octave

Data: Transpose

Data: Program

Data: Bank LSB

Data: Bank MSB

Data: Channel

Data: Tuning

Program

Bank LSB

Bank MSB

Modulation Assign

Knob Assign

Pitch Bend Assign

Pitch Bend Rate

Modulation Rate

Velocity

Sustain Mode

Default

Enter

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

M-Audio Keystation Mini 32 MK3 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von M-Audio Keystation Mini 32 MK3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info