Bedienungsanleitung M-Audio Oxygen 61 (Seite 8 von 88) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

707326

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

NOTE: Bank LSB messages will not have any effect until they are followed by a Program Change message.

Bank MSB: The Bank MSB function sends bank change messages on the Global MIDI channel. These messages are used to

access additional banks of sound presets on virtual instruments or sound modules (if additional banks are available). Refer to

the documentation for the virtual instrument or synthesizer to confirm it will respond to these messages.

1. Press the Edit button.

2. Press the Bank MSB key. The LED display will show the last sent Bank MSB number (for example, ".0.1.").

3. Enter the new Bank MSB number using the number keys.

4. Press the Enter key.

NOTE: Bank MSB messages will not have any effect until they are followed by a Program Change message.

Panic: Press the Edit button followed by the Panic key to send an "All Notes Off" message on all 16 MIDI channels. This stops

any stuck notes that continue to play even after their keys have been released.

Velocity Curve

The Velocity Curve Select key (Vel Curve) is used to change the touch sensitivity of the keyboard or pads. This setting lets you

decide how the force with which you hit a key affects the volume at which a note plays.

Oxygen 61 keyboards provide 7 different sensitivity options:

1: C1 generates lower velocity values for the same force. This setting is useful for playing more quietly, even if you tend to

strike the keys harder.

2: C2 is the default setting, and is designed to be useful for most players with an "average" touch (people who play with an

average amount of force).

3: C3 generates higher velocity values for the same force. This setting is useful for playing more loudly, even if you tend to

strike the keys with less force.

4: C4 generates an equal velocity value for a given amount of force, resulting in a linear (or neutral) keyboard response.

5: F1 is a setting that effectively disables sensitivity, meaning the keyboard will generate a fixed velocity value of 64 (on a

scale of 0-127) regardless of how hard or soft the keys are struck.

6: F2 is a setting that effectively disables sensitivity, meaning the keyboard will generate a fixed velocity value of 100 (on a

scale of 0-127) regardless of how hard or soft the keys are struck.

7: F3 is a setting that effectively disables sensitivity, meaning the keyboard will generate a fixed velocity value of 127 (on a

scale of 0-127) regardless of how hard or soft the keys are struck.

1. Press the Edit button.

2. Press the Velocity Curve key (press Velocity Curve key twice to edit pad velocity settings). The LED display will show the

current velocity curve (for example, ".C.0.2").

3. Type the Velocity Curve number (1 through 7) using the number keys.

4. Press the Enter key.

- or –

1. Press the Edit button.

2. Press the Velocity Curve key (press Velocity Curve key twice to edit pad velocity settings). The LED display will show the

current velocity curve (for example, ".C.0.2").

3. Use the < or > buttons to scroll through the Velocity Curves (C1 through F3).

4. Press the Enter key.

Drawbar Mode: This parameter switches all 9 faders to Drawbar Mode. In this mode, the operation of the faders is reversed,

so that the maximum value (127) is at the bottom and the minimum value (0) is at the top. This feature is intended for use with

Organ presets that utilize drawbars.

1. Press the Edit button.

2. Press the Drawbar key. The LED screen will momentarily display "On". Drawbar Mode becomes active immediately and

Edit mode exits automatically. Repeat steps 1 and 2 to disable Drawbar Mode. The LED screen will momentarily display

"OFF".

Memory Dump: The SysEx Memory Dump function (Mem Dump) will send the contents of all 10 Preset memory locations for

storage in a DAW application. Please refer to the documentation provided with your DAW software for information on how to

record SysEx MIDI data.

1. Prepare a MIDI track within your DAW software to record from your Oxygen 61 keyboard.

2. Press the Edit button on your Oxygen 61 keyboard.

3. Start the MIDI recording in your DAW software.

4. Press the Memory Dump key on your Oxygen 61 keyboard. The SysEx memory dump will begin immediately and the

LED screen will display "SYS" to indicate that data is being sent. The SysEx file will appear as a new MIDI recording in

your DAW software.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

M-Audio Oxygen 61 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info