Bedienungsanleitung M-Audio Oxygen 61 (Seite 15 von 88) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

707326

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

The following example configures a button to increment through the sound presets on a connected software or

hardware synthesizer:

1. Press the Edit button.

2. Press the Select button or Control Select (Ctrl Sel) key.

3. Select the control as described earlier in this guide.

4. Press the Control Assign (Ctrl Asgn) key.

5. Enter 156 using the number keys. This configures the button or sustain pedal to increment the Program

number.

6. Press the Data 2 key.

7. Enter 0 using the number keys. This specifies the lowest Program number.

8. Press the Data 3 key.

9. Enter 127 using the number

keys. This specifies the highest Program number.

10. Press the Enter key.

To configure a button or the sustain pedal to decrement a Program Change between a maximum and minimum

value, assign the button to number 155. The minimum and maximum values are set using the Data 2 and Data 3

parameters respectively.

NOTE: Each button or the sustain pedal will only increment or decrement its own parameter value and this value is

independent of any other button. In other words, assigning one button to increment through sound presets and

another button to decrement through sound presets will cause the first button to recall programs 1, 2, 3, etc., each

time the button is pressed. Pressing the second button will recall programs such as 127, 126, 125 (as opposed to

starting to decrement where the first button left off for example, 2, 1, 0).

Reversing the Operation of Knobs, Wheels, or Faders

Most MIDI parameters assignable to knobs, wheels, or faders can be configured so that the control’s operation is

reversed. Once a control is assigned to a MIDI parameter, by default the Data 2 parameter defines the minimum

value (for example, 0) while the Data 3 parameter defines the maximum value to be transmitted (for example, 127).

Reversing the operation of knobs, wheels, or faders is achieved by entering a higher value for the Data 2 parameter

(usually minimum) and a lower value for the Data 3 parameter (usually maximum). This is useful when a single Fader

needs to be configured to work as a drawbar when controlling with an organ-based virtual instrument, or if a knob

needs to be configured in reverse when controlling a particular parameter. This requires two values to be specified

(values given are examples):

Key Parameter Value

Data 2 (example)

Minimum value

127

Data 3 (example)

Maximum value

The following example configures a knob, wheel, or fader to reverse its operation:

1. Press the Edit button.

2. Press the Select button or Control Select (Ctrl Sel) key.

3. Select a control as detailed earlier in this guide.

4. Press the Data 2 key.

5. Enter 127 using the number keys. This configures the control to reach its maximum value when it is all the way

down.

6. Press the Data 3 key.

7. Enter 0 using the number keys. This configures the control to reach its minimum value when it is all the way up.

8. Press the Enter Key.

The knob, wheel, or fader now operates reversed. What was originally the maximum position is now the minimum

position, and vice versa.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

M-Audio Oxygen 61 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info