707327
17
Zoom out
Zoom in
Vorherige Seite
1/51
Nächste Seite
16 User Guide Oxygen 88
When a new Velocity Curve is selected using either method described below, the LED screen will display the first 4
Velocity curves as C1 - C4, and the three fixed velocity settings as F1 - F3.
1. Press the Advanced button.
2. Press the Velocity Curve key - the LED screen will display the current velocity curve (for example, ".C.2").
3. Type the Velocity Curve number (1 through 7) using the number keys.
4. Press the Enter key.
Or:
1. Press the Advanced button.
2. Press the Velocity Curve key - the LED screen will display the current velocity curve (for example, ".C.2").
3. Use the "
-" and "+" buttons to scroll through the Velocity Curves (C1 through F3).
4. Press the Enter key.
Drawbar Mode
This parameter switches all 9 Sliders to Drawbar Mode.This reverses the operation of the sliders, so that the maximum
value (127) is at the bottom and the minimum value (0) is at the top.
This feature is intended for use with Organ presets that utilize drawbars.
1. Press the Advanced button.
2. Press the Drawbar key - the LED screen will momentarily display "On".
Drawbar mode becomes active immediately, and Advanced mode exits automatically.
To disable Drawbar mode, repeat steps 1 and 2. The LED screen will momentarily display "OFF".
Memory Dump
The SysEx Memory Dump function (MEM DUMP) will send the contents of all 10 Preset memory locations for storage
in a DAW application. For information on how to record SysEx MIDI data, please refer to the documentation provided
with your DAW software.
1. Prepare a MIDI track within your DAW software to record from your Oxygen 88.
2. Press the Advanced button on your Oxygen 88.
3. Start the MIDI recording in your DAW software.
4. Press the Memory Dump key on your Oxygen 88. The SysEx memory dump will begin immediately, and the LED
screen will display "SYS" to indicate that data is being sent.
The SysEx file will appear as a new MIDI recording in your DAW software.
Restoring a Memory Dump:
IMPORTANT: Restoring a saved Memory Dump will permanently overwrite all current presets on your Oxygen 88.
Play back a MIDI track that contains a previously recorded Oxygen 88 SysEx Memory Dump. The SysEx data is
sent back to Oxygen 88, and the LED screen will display "SYS" while receiving the SysEx data.
NOTE: Restored settings will not become active until a new preset is loaded on your Oxygen 88, or the device has
been powered off and on.
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für M-Audio Oxygen 88 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von M-Audio Oxygen 88

M-Audio Oxygen 88 Kurzanleitung - Deutsch, Englisch, Französisch, Italienisch, Spanisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info