Bedienungsanleitung M-Audio Oxygen 88 (Seite 41 von 51) (Englisch)

707327

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

Oxygen 88 User Guide  39

11: Troubleshooting

 Oxygen 88 suddenly stopped working.

Turn off the unit for 10 seconds, then restart your computer and power up the keyboard. If the problem persists,

check the website for the latest drivers and re-install them.

 The keyboard is connected to my computer with the USB cable, but I cannot locate Oxygen 88 in MIDI

devices dialog box for my DAW or other computer-based application.

Oxygen 88 may not be receiving enough USB bus power to function correctly. Try plugging it into a different

USB port or a powered USB hub connected to your computer.

In Windows XP, the Oxygen MIDI ports will appear as "USB Audio Device" if the optional drivers have not

been

installed. Select "USB Audio Device" as your MIDI input and output device.

Please refer to Chapter 5 of this guide for instructions on how to install the Oxygen 88 Drivers.

 The Oxygen keyboard does not trigger sounds in my music software.

Most programs have a MIDI activity indicator that can be used to confirm whether MIDI data from the keyboard

is reaching the software. If the software is not receiving any MIDI data, be sure the controller is properly

installed and is selected as a MIDI input device within your software. Refer to the documentation for your DAW

software, to learn how to configure and select MIDI input devices.

If the MIDI activity indicator shows that MIDI data is reaching your software, then you may not be hearing

sounds because the MIDI data is not being routed correctly through the software itself. Refer to the

documentation for your DAW software, to learn how to route MIDI data properly.

 When playing a virtual instrument loaded in my music software, there is a noticeable delay before I

hear any sound.

This delay is known as latency, and it may be possible to reduce it through the Control Panel of your audio

interface. Please refer to the User Guide your audio interface to see if this is possible.

 I have connected a sustain pedal to my Oxygen keyboard, but its operation is reversed (i.e., the notes

sustain when the pedal is not pressed, but the notes stop sustaining once the pedal is pressed).

The polarity of the sustain pedal is determined by the keyboard upon startup. When the keyboard is powering

up, the sustain pedal is assumed to be in the "up" (off) position. It is important that the sustain pedal is not

pressed down during startup, otherwise its operation will be reversed.

 My virtual instrument software (or hardware MIDI module) always recalls the sound next to the

program change number that I have sent to it from Oxygen 88. For example, if I send a program change

number 40 (Violin), my MIDI module or software loads sound number 41 (Viola).

This behavior is normal. Some MIDI devices count their sound presets from 1-128 instead of 0-127. As a

result, there may be an offset of +/-1 between the program change number sent from the keyboard and the

recalled sound preset on your module.

 I have changed many parameters and would like to go back to the default settings of the keyboard.

Oxygen 88 can be reset to its "factory" settings by simultaneously pressing the "+" and "

-" buttons as the unit

is switched on.

NOTE: All assignments and modified patches will be lost once you perform this action—use this function with

caution!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

M-Audio Oxygen 88 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von M-Audio Oxygen 88

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info